Well, Ralph, this takes you into the "fabrication, design, erection, testing, commissioning, welding, modification, repair" legend department of PipingDesign.com.
Your experiences and thoughts are much welcomed here.
Paul
> im one of the old guys. been invoved with piping since '76 when
all you got
> is the slide rule, a tsquare, trinagle and scale and measuring
tape. in a
> year or 2 i plan to do jsut that. the acronyms is not important
it is the
> experience - fabircation, design, erection, testing,
commissioning, welding,
> modification, repair.
>
> it is now different paul. palnt are no longer being built the
old fashioned
> way anymore. its built better, quicker and more reliable now.
>
> -----Original Message-----
> From: Paul Bowers [mailto:pbowers@pipingdesign.com]
> Sent: 26 May, 2001 8:03 AM
> To: PipingDesign@yahoogroups.com
> Subject: Re: [PipingDesign] P&ID
>
>
> SARE makes a good point again.
>
> I guess all we "old school guys" should just go out to pasture,
> since now the most important thing seems to be the understanding
> of acronyms.
>
> One has to wonder how refineries were once built in the old
days,
> though.
>
> Paul
>
>
> ----- Original Message -----
> From: SARE, RALPH H. <SARERH@YANPET.SABIC.com>
> To: <PipingDesign@yahoogroups.com>
> Sent: Saturday, May 26, 2001 12:46 AM
> Subject: RE: [PipingDesign] P&ID
>
>
> > not according to 29 CFR 1910. the rules has changed so much
now.
> not only
> > must you be conversant with section 111 and xi,or with B31.1
> /B31.3 or be
> > familiar with microstation, AISC, FEA and caesar II but you
have
> to
> > integrate all the info using the PDS and EDMS and be able to
> migrate it
> > seamlessly with SAP. After ISO 9001 and the PSM, now comes iso
> 14000 which
> > will impact the way we specify valves. No im not trying to
> impress u guys
> > but the realty of the business in piping has leap in bounds.
Its
> not as
> > simple as routing a line anymore.
>
>
>
> _____________________
> Piping Design Central
> [ http://www.PipingDesign.com ]
> ________________________________________
> We hope you find this newsletter useful.
> If not, you can unsubscribe at:
> PipingDesign-unsubscribe@yahoogroups.com
> Post message: PipingDesign@yahoogroups.com
> Subscribe: PipingDesign-subscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
> _____________________
> Piping Design Central
> [ http://www.PipingDesign.com ]
> ________________________________________
> We hope you find this newsletter useful.
> If not, you can unsubscribe at:
> PipingDesign-unsubscribe@yahoogroups.com
> Post message: PipingDesign@yahoogroups.com
> Subscribe: PipingDesign-subscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
Received on Sat May 26 01:29:00 2001
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:23:53 EDT