Re: full and reduced bore valves.

I guess on my prior reply I should had said (6") 150 lb. ball valve.

• Original Message ----- From: EVERETT W. NICHOLS <enichols@bbtel.com> To: <PipingDesign@yahoogroups.com> Sent: Friday, June 08, 2001 10:08 AM Subject: Re: [PipingDesign] full and reduced bore valves.

> Using a 150 lb. cl. ball valve as an example: KTM reduced bore ball valve
is
> 10.5" F/F, while their full bore is 15.5" F/F. This is because of the
> smaller ball and body cavity requirement for a reduced bore versus a
larger
> ball/cavity requirement on a full bore.
>
> ----- Original Message -----
> From: Mandar Apte (Ruwais Site - ENG) <A.Mandar@TECNIMONT.CO.AE>
> To: <PipingDesign@yahoogroups.com>
> Sent: Friday, June 08, 2001 6:28 AM
> Subject: [PipingDesign] full and reduced bore valves.
>
>
> > Why is it that the reduced bore valves are cheaper than full bore valves
?
> > Or is it due to less machining requirement ?
> >
> > have a nice time :-)
> > Mandar
>
> --------------------------------------------------------------------------
> > Tecnimont Ruwais site
> > Phone :- 00-971-2-8760077 extn. 214
> > Fax :- 00-971-2-8760211
> >
> >
> > _____________________
> > Piping Design Central
> > [ http://www.PipingDesign.com ]
> > ________________________________________
> > We hope you find this newsletter useful.
> > If not, you can unsubscribe at:
> > <a href="/group/PipingDesign/post?postID=kzgvXBfh6aoG1rQHU60Z4vsshW97bA82-7vAjzw-MPe0dniefLmAfvhishx-xOdIhJlaD5qM7GNBjzqmZPctTQs6rX0FRrRBKd5-orWI">PipingDesign-unsubscribe@yahoogroups.com</a>
> > Post message: <a href="/group/PipingDesign/post?postID=ecj8RmoOU2-ZixCdbuz7Ewk74NDSmiPCBmRyTwsELjjcAPKlbo8MMTj6hNnpMIQAECk82nEyvP0Z5zAlRD46ab04">PipingDesign@yahoogroups.com</a>
> > Subscribe: <a href="/group/PipingDesign/post?postID=BrOKfbnB5ucmc4YSrKHqigQtRw2KpoDyuFtk9LCvSywypnlsECgJuqUjz9yvbEPnTNW6SA9i0ywXU5lTzWTF_JHdqVdz_6haf0nU9rmeeaQ">PipingDesign-subscribe@yahoogroups.com</a>
> >
> > Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/">http://docs.yahoo.com/info/terms/</a>
> >
> >
> >
>
>
> _____________________
> Piping Design Central
> [ http://www.PipingDesign.com ]
> ________________________________________
> We hope you find this newsletter useful.
> If not, you can unsubscribe at:
> <a href="/group/PipingDesign/post?postID=kzgvXBfh6aoG1rQHU60Z4vsshW97bA82-7vAjzw-MPe0dniefLmAfvhishx-xOdIhJlaD5qM7GNBjzqmZPctTQs6rX0FRrRBKd5-orWI">PipingDesign-unsubscribe@yahoogroups.com</a>
> Post message: <a href="/group/PipingDesign/post?postID=ecj8RmoOU2-ZixCdbuz7Ewk74NDSmiPCBmRyTwsELjjcAPKlbo8MMTj6hNnpMIQAECk82nEyvP0Z5zAlRD46ab04">PipingDesign@yahoogroups.com</a>
> Subscribe: <a href="/group/PipingDesign/post?postID=BrOKfbnB5ucmc4YSrKHqigQtRw2KpoDyuFtk9LCvSywypnlsECgJuqUjz9yvbEPnTNW6SA9i0ywXU5lTzWTF_JHdqVdz_6haf0nU9rmeeaQ">PipingDesign-subscribe@yahoogroups.com</a>
>
> Your use of Yahoo! Groups is subject to <a href="http://docs.yahoo.com/info/terms/">http://docs.yahoo.com/info/terms/</a>
>
>
>
Received on Fri Jun 08 20:27:00 2001