archive of magazine.

Hi Ralph

How will I get the archives of magazine like Chemical Engg. Chemical Processing, Hydrocarbon Processing. I have seen many emails in this group which referred to articles from old issues of above magazines. How do I get archive of these magazines.
Thanks in advance.
Hitesh.

> -----Original Message-----
> From: SARE, RALPH H. [SMTP:SARERH@YANPET.SABIC.com]
> Sent: Saturday, October 06, 2001 10:57 AM
> To: 'PipingDesign@yahoogroups.com'
> Subject: RE: [PipingDesign] High temperature Piping in Refineries
>
> Installation of Centrifugal Pumps. a 2 part report written by Igor
> Karassik
> (who is also the author of Pump Handbook).
> Part I appeared Feb 1989 issue of Chem. Processing.
> Part II appeared March 1989.
> The article talks about piping strains, disch paiping, expansion joint, 2
> elbows in series and protection againts vortex formation.
>
> Pitfalls and Misunderstanding - load and stress imposed by a comnnecting
> pipe.
> Article contributed by LC PEng during the 2nd International HP Equipment
> Reliability Conf sponsored by Gulf Publishing. Peng is ac onuslting
> engineer
> based in Houston.
>
> Machinery Reliability Assesment by Heinz Bloch. Heinz is well known
> equipment reliability expert dealing in turbomachinery. Look up Chapter 23
> Review of mech'l structures and pipng for machinery.
>
> May i add that the nozzle load is not limited to rotating machinery.Piping
> connected to fin fan coolers must also be design to meet the req't of API
> 661 so does the piping for fired heater (API 560) and the storage tanks
> API
> 650. The Pipng circuit for the reboilers require speical care too.
> __________________________________________
>
Received on Sat Oct 06 04:28:00 2001