RE: Nozzle placement in PDS

From: <Rajesh_V_Balapure@ril.com>
Date: Fri May 24 2002 - 06:45:00 EDT

Paul,

             In my opinion ,there is no need to form separate CAD group,The same group (piping Design )
can be used as CAD group by CAD professionsls ,By this way non CAD group professionals can also benefit from it.
I agree with steve's opinion:
"I have no problem with the CAD detail questions, and feel that this is an appropriate forum. If a separate forum was formed, then I would be concerned
that this would create a further division between the applied theoretical and the more practical aspects of piping design." raj..

Ashok Dani <ashokdani@tatachem.tata.com> on 05/24/2002 04:29:34 PM

Please respond to PipingDesign@yahoogroups.com

To: "'PipingDesign@yahoogroups.com'" <PipingDesign@yahoogroups.com> cc:
Subject: RE: [PipingDesign] Nozzle placement in PDS

Dear Paul,
There is no any specific group for Piping Design Software. I have already tried to put this types of questions on groups for CAD. Now, this is the only groupd where i can get both, Piping experts as well as
PDS experts.
Regards
Parag

> -----Original Message-----
> From: Paul Bowers [SMTP:pbowers@pipingdesign.com]
> Sent: Friday, May 24, 2002 5:31 PM
> To: PipingDesign@yahoogroups.com
> Subject: Re: [PipingDesign] Nozzle placement in PDS
>
> Perhaps this is a good opportunity to more clearly define the goals of
> this
> list.
>
> It was originally founded to promote the concept of piping design as an
> engineering discipline, to aid in transferring knowledge from the
> "old-timers" to the newcomers, to discuss and explore interesting
> projects,
> processes and methods, and to create a world-wide community of people
with
> similar interests.
>
> -Now I revert back to Old Fart mode-
>
> Detailed CAD piping software questions do not really belong on the list,
> as
> they are far too technically specific for the majority of the subscribers
> to
> be able to relate to.
>
> What I am seeing on this list is a lot of great input and responses
(75%),
> some irrelevant stuff (10%) and my usual moderator blatherings (5%).
>
> With the amount of subscribers we have, we could have a really good list
> fight about this.
>
> Paul
>
>
> ----- Original Message -----
> > It is not like that, There is no need to write a EDEN PROGRAM. I am
> facing
> > problem because i am very new in PDS.
> > I think you are actually not aware of it. I have already done it to put
> 40"
> > nozzle with help of Mr. Nimish Pindaria who was perviously with me and
> at
> > presently in RIL and also member of this group. If you have any doubt
> about
> > PDS please contact him (Pl. do not give reply of matter in which you
are
> not
> > knowing the truth)
>
> > > -----Original Message-----
> > > actually programming is available only upto 36" only in pds.
> > > For placing 40" Nozzle you have write EDEN PROGRAM.
> > > If you are not aware of it, your administrator might be knowing it,
> > > just consult him.
>
>
>
>
>
> _____________________________________________________
> Unsubscribe: PipingDesign-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

---

Unsubscribe: PipingDesign-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Received on Fri May 24 06:45:00 2002