Re: MD Solids

Since the drive in question is past FAT32 and NTFS (not too f***ing sure) I am not convinced that reformatting is the solution.

Which reminds me: the big buck video capture card is now working, so I might be uploading some refinery-related stuff (if the server can handle it).

And now for a message from our sponsor, <a href="/group/PipingDesign/post?postID=bWxAc7Q3uIPb--nDOW_20T9uu8wPS5bE9X0gf1gY0yPI9kv-q7bK4cgiL9wI6eNLvSPVNiUaBHNJuiYJFg">RAMESH@ALPHADXB.COM</a>

Paul

• Original Message ----- From: "Steve McKenzie" <Mechproj@xtra.co.nz> To: <PipingDesign@yahoogroups.com> Sent: Sunday, September 22, 2002 9:15 PM Subject: RE: [PipingDesign] MD Solids

> I doubt if its the interpreter; more likely a few bad sectors on the hard
> drive due to excessive application of lubricant. Unfortunately, drying out
> doesnt seem to help. Suggest you reformat.
>
> Cheers
>
> Steve
>
> -----Original Message-----
> From: Paul Bowers [mailto:pbowers@pipingdesign.com]
> Sent: Monday, September 23, 2002 6:33 PM
> To: <a href="/group/PipingDesign/post?postID=7Up6HNicUqdt6cJPrEqBx12sBhkpTIYMqzN__5qnVXGFKdldePYmqi87lb_eRdEhcq2_lfwjtoEU1owWRPt7nlrS7wq-Q1Y">PipingDesign@yahoogroups.com</a>
> Subject: Re: [PipingDesign] MD Solids
>
>
> Hi Steve (this is a private message not sent to the PipingDesign list),
>
> I've tried that already using external fluid containment vessels (
> http://www.cafeshops.com/cp/prod.aspx?p=pipingdesign.523344 ), but I think
> this problem is more related to the data-interpretation device's inability
> to collect incoming information completely.
>
> Paul
>
>
> ----- Original Message -----
> From: "Steve McKenzie" <Mechproj@xtra.co.nz>
> To: <PipingDesign@yahoogroups.com>
> Sent: Sunday, September 22, 2002 8:10 PM
> Subject: RE: [PipingDesign] MD Solids
>
>
> > Paul
> >
> > I got this message twice, so you may still have a few engagement
problems.
> > Suggest you try an alcohol based lubricant, applied internally, to
loosen
> up
> > the action.
> >
> > Cheers
> >
> > Steve McK
> >
> > -----Original Message-----
> > From: Paul Bowers [mailto:pbowers@pipingdesign.com]
> > Sent: Monday, September 23, 2002 5:14 PM
> > To: <a href="/group/PipingDesign/post?postID=7Up6HNicUqdt6cJPrEqBx12sBhkpTIYMqzN__5qnVXGFKdldePYmqi87lb_eRdEhcq2_lfwjtoEU1owWRPt7nlrS7wq-Q1Y">PipingDesign@yahoogroups.com</a>
> > Subject: Re: [PipingDesign] MD Solids
> >
> >
> > Note to self: engage brain before replying.
> >
> > Paul
> >
> >
> > ----- Original Message -----
> > From: "Paul Bowers" <pbowers@pipingdesign.com>
> > To: <PipingDesign@yahoogroups.com>
> > Sent: Sunday, September 22, 2002 10:00 PM
> > Subject: Re: [PipingDesign] MD Solids
> >
> >
> > > That message came to me only, not the group.
Received on Mon Sep 23 06:32:00 2002