Re: SS316L(NACE) material

From: <TANMOY>
Date: Thu Oct 17 2002 - 00:59:00 EDT

dear member
actually i want to know the piping material such as pipe fittings,flanges & valves to be used for acid gas section. and what special heat treatment is required if i select ss316l material.
regards
tanmoy
--- Tuberias Visa Hermosillo <amurillo@t-visa.com.mx> wrote:
> Tanmoy
>
> There is a product from Garlock call a Flexseal , it
> is a Gasket design for
> flanges with a chevron system, it as a metallic and
> a sealing element,
> typical 304 and Graphite .
> For your application I will chose 316SS and Teflon.
> It will go to 250 °C .
> They comply with ASME B16.20 .
>
> (There also known has Flexitallic)
>
>
> Arturo M.
>
> ----- Original Message -----
> From: "TANMOY SABUD" <tsabud@yahoo.com>
> To: <PipingDesign@yahoogroups.com>
> Sent: Tuesday, October 15, 2002 11:33 PM
> Subject: Re: [PipingDesign] SS316L(NACE) material
>
>
> > LINE PRESSURE IS FROM 5BAR(G) TO 24 BAR(G). DESIGN
> > TEMPERATURE WILL VARY FROM 60 DEG C TO 200 DEG C.
> > COMPOSITION IS LIKE THIS.
> > 24%H2S, 67%CO2 & 11% H20
> > THEORITICALLY NO CHLORIDE IS PRESENT.
> > THANKS
> > TANMOY
> > --- Tuberias Visa Hermosillo
> <amurillo@t-visa.com.mx>
> > wrote:
> > > Tanmoy.
> > >
> > > Line Pressure ?
> > >
> > > ----- Original Message -----
> > > From: "TANMOY SABUD" <tsabud@yahoo.com>
> > > To: <PipingDesign@yahoogroups.com>
> > > Sent: Monday, October 14, 2002 8:56 AM
> > > Subject: [PipingDesign] SS316L(NACE) material
> > >
> > >
> > > > DEAR MEMBERS
> > > > what are the limitations of using flat ring
> gasket
> > > in
> > > > sour service of 150# class? what special heat
> > > > treatment is required for SS16L (NACE)
> material
> > > used
> > > > for acid gas piping?if anybody konws please
> > > intimate.
> > > > regards
> > > > tanmoy sabud
> > > >
> > > >
> > > >
> __________________________________________________
> > > > Do you Yahoo!?
> > > > Faith Hill - Exclusive Performances, Videos &
> More
> > > > http://faith.yahoo.com
> > > >
> > > >
> > > > Texas Flange - a good source for information
> on
> > > industrial flanges, all
> > > they ask is for referrals for designs they help
> > > with.
> > > > 877-610-8924.
> > > > www.texasflange.com
> > > >
> > >
> >
>

---

> > > > unsubscribe:
> > > PipingDesign-unsubscribe@yahoogroups.com
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Faith Hill - Exclusive Performances, Videos & More
> > http://faith.yahoo.com
> >
> >
> > Texas Flange - a good source for information on
> industrial flanges, all
> they ask is for referrals for designs they help
> with.
> > 877-610-8924.
> > www.texasflange.com
> >
>

---

> > unsubscribe:
> PipingDesign-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>

---

Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More http://faith.yahoo.com Received on Thu Oct 17 00:59:00 2002