pipingdesign: Re: Re: Trunnion on an Elbow

From: <zope_tushar@fwc.com>
Date: Fri Nov 15 2002 - 00:58:00 EST

Geoff Stone,

Do u mean that elbow with trunion and without trunion will show same behaviour in the thermal case?? I mean will they absorb the same displacement??

Tushar

<a href="/group/PipingDesign/post?postID=OjEkO8ETduZeAcFo16zMKiEAPiLKOAV-JGuBmN-t_JhL7Mv3si3nvR-R3phfbRxbckOGk5uAI5mwwOMfhZg1Ba8hHQ">PipingDesign@yahoogroups.com</a> AT SMTP Sent by: Geoff Stone DD&D Australia <blenrayaust@yahoo.co.uk> AT SMTP 11/15/02 01:00 PM

         To:     PipingDesign@yahoogroups.com AT SMTP@ccMTA-sgsinmx001
         cc:     (bcc: Zope Tushar/fwsg)
         Subject:        Re: [PipingDesign] Re: Trunnion on an Elbow

The trunnion detail that you are referring to is usually a thin plate welded to
the back of the elbow over a relatively small section of the outside radius.

Thinking about it, when the elbow is strained in plane or out of plane the SIF
wouldnt be changed drammatically. In-plane the elbow will be changed from
circular to elliptical and out of plane the elbow will rotate because the
trunnion plate is relatively thin and will deflect. Any comments? --- mechengr1977 <mechengr1977@yahoo.com> wrote:

<tt>
the use of trunnion welded to the elbow is a common practice in

refinery, power plant and petrochem. Charts has been develop by

engineering/contruction firms such as Flour Daniel and Bechtel to
aid in its sizing/selection. This SIF business is getting out of
hands.

In PipingDesign@y..., "KAUSTUBH JOSHI"
<kvj@e...>
wrote:
> Dear Shreedhar,
>
> When a trunnion is welded onto the bend, the bend looses
the flexibility. So in actual case, the flexibility factor associated with the bend will reduce.
>
> You should try to put supports away from bend to use the

flexibility of the bend.
>
> Regards,
> Kaustubh

</tt>

<tt>
Discussion List sponsor: Texas Flange - a good source for information on
industrial flanges, all they ask is for referrals for designs they help
with.
877-610-8924.
www.texasflange.com

unsubscribe: <a href="/group/PipingDesign/post?postID=-Ejjwpr3-B-G31SOnO-n20sPOw3dWlA8Fpu5NUoFswjyfNbFdsBY04LOT3I3XwKaaKTAJlv4mGbf3XqEB7VMMghuFtMxaYGBnrstEmALWQ">PipingDesign-unsubscribe@yahoogroups.com</a>

Somebody email this guy: RAMESH@ALPHADXB.COM</tt>

<tt>Your use of Yahoo! Groups is subject to the <a href="<a href="http://docs.yahoo.com/info/terms/">http://docs.yahoo.com/info/terms/</a> <http://docs.yahoo.com/info/terms/>">Yahoo! Terms of Service</a>.</tt>
</br>

Design Detail and Development (a division of Blenray Pty Ltd) We specialise in pipe network and waterhammer analysis, pipe stress analysis, the design of buried pipelines and thermoplastic pipe systems. Local tel 0402 35 2313 fax 02 8850 2313
Overseas tel 61 402 35 2313 fax 61 2 8850 2313 Mail Address PO Box 1351 Castle Hill NSW 1765 Australia

Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site <a href="http://webhosting.yahoo.com">http://webhosting.yahoo.com</a> <http://webhosting.yahoo.com>

Discussion List sponsor: Texas Flange - a good source for information on industrial flanges, all they ask is for referrals for designs they help with.
877-610-8924.
www.texasflange.com

Somebody email this guy: <a href="/group/PipingDesign/post?postID=jzJLPyit-3FaJl9MzBddHYUBfL2SSkgQQ2b4G_WBpIxPnMABILcGyCM5rcCqxE1iisaNArEYIjN38ldman8">RAMESH@ALPHADXB.COM</a>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/>.

[Non-text portions of this message have been removed] Received on Fri Nov 15 00:58:00 2002

This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 11:40:25 EST