RE: Re: Feild Check List

From: <JAVEEDI@iocl.co.in>
Date: Thu Mar 27 2003 - 00:45:00 EST


Yes; you are right. We follow 2 types of checklists; one is for mechanical completion (normally referred to as Punch-list) and other before commissioning of a plant. The punch-list for Piping Mech. Completion is prepared by contractor and checked by Project Management Consultant (PMC)/ Owner; to be liquidated by Contractor. The checklist before commissioning is by Client Operations/ other groups/ PMC and the completion of systems is recorded over a few designated 'Handover' formats. It is highly desired that the total piping be got checked from Mechanical/ Process/ Operations/ Instrument viewpoint.

Some of the general points of check wrt Isometric/ GA drawings are: Supports check
Welding of Joints, slag removal etc.
Valves, location & their direction wherever applicable Venturi/ instruments/ orifices/ other fittings; Pipe condition (say dents/ pitting etc if at all) Drains/ vents
Special notes with respect to P&IDs
Specific checkpoints related to special piping such as Slopes, Jacketing connections etc.
Piping completion including branching etc wrt drawings/ General arrangements.

Regards,

  -----Original Message-----
From: tomcruz55 [mailto:tomcruz55@yahoo.com] Sent: Wednesday, March 26, 2003 11:37 PM To: <a href="/group/PipingDesign/post?postID=Zt7pfq9-HzLxNFdkdKkifSqXoxFT9TyyiSo_JW2_7AivDqkPto50M71gwNDht1drcm2b1PmDeDvnT4Ip_j99Dk-__T0Vn9A">PipingDesign@yahoogroups.com</a> Subject: [PipingDesign] Re: Feild Check List

The pdf file referred to below is all about pipe modeling. A field checklist prior to commissioning or mechanical acceptance is normally term as punchlist. Normally this is part of the project deliverables prepared not by Owner but rather by the Contractor.

The norsok site may hve something on this. If not email me and I'll send you a copy of our commissioning manual pertaining to Piping (if i still have it - not sure)Normally this activity fall unders the responsibility of your QC/QA (local law may require Inspector signoff) and not Operation.


Discussion List sponsor: The fluid flow calculations website - www.LMNOeng.com - LMNO Engineering,
Research, and Software, Ltd.

unsubscribe: <a href="/group/PipingDesign/post?postID=Gs0Q69Ihjp2DuuGYCAB2CVet9fy_T6XBZUOoVO2LfCifcgX9GX4Z-wn5B6mm7JE4KrxjX-gtAoKjlq3GKIKSi5A6Y6bKKs__ULcr61gu">PipingDesign-unsubscribe@yahoogroups.com</a>

Your use of Yahoo! Groups is subject to <a href="http://docs.yahoo.com/info/terms/">http://docs.yahoo.com/info/terms/</a>


This electronic communication and any accompanying document is being transmitted over the Indian Oil Network and contains confidential information that is for the exclusive use of the individual or entity to which it is addressed and is protected against unauthorised disclosure. If the reader of this message is not the intended receipient or the employee or agent responsible to deliver to the intended receipient, or is not intended to act on it, be aware that any disclosure, dissemination, distribution or copying of this communication, or the use of its contents is prohibited and is likely to be attended by legal consequences. If you have received this communication in error and/or are not the intended receipient, please immediately notify the undersigned or Indian Oil Corporation Ltd. at the telephone or the fax number or email address given above and permanently delete the original message from your email system. Whilst this mail has been checked for all the known viruses, recipients should undertake their own virus checking as Indian Oil Corporation Ltd. will not accept any liability whatsoever
Received on Thu Mar 27 00:45:00 2003

This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 11:40:27 EST