Hi, Jim:
Thank you for your inputs. Do you have more detailed information for the UK material, such as, detailed chemical composition and Tensile/Yield Strength & Elongation?
Best Regards,
Samuel
-----Original Message-----
From: Jim Hubbard [mailto:jhubbard@enercon.com]
Sent: Monday, May 26, 2003 10:25 AM
To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] UK Material BS3602/35
This is a comparison of US to BS piping specs if this helps.
ASTM A 106 BS3602
Grade A HFS 23
Grade B HFS 27
Grade C HFS 35
> -----Original Message-----
> From: Samuel Liu [mailto:samuel.liu@amec.com]
> Sent: Monday, May 26, 2003 12:01 PM
> To: 'PipingDesign@yahoogroups.com'
> Subject: [PipingDesign] UK Material BS3602/35
>
>
>
> Hi, All:
>
> Does anyone know the spec (Chemical and mechanical properties)?
> BS3602 Grade
> 35 might be an out of dated standard, and I'm pretty sure that it is
> different with existing BS3602-1 or 2.
>
> Samuel
>
>
>
> The information contained in this e-mail is intended only for the
> individual or entity
> to whom it is addressed. Its contents (including any
> attachments) are confidential and
> may contain privileged information. If you are not an intended
> recipient you must not
> use, disclose, disseminate, copy or print its contents. If you
> receive this e-mail in
> error, please notify the sender by reply e-mail and delete and
> destroy the message.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> =====================================================
> Discussion List sponsor: The fluid flow calculations website -
www.LMNOeng.com - LMNO Engineering,
Research, and Software, Ltd.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
The information contained in this e-mail is intended only for the individual or
entity
to whom it is addressed. Its contents (including any attachments) are
confidential and
may contain privileged information. If you are not an intended recipient you
must not
use, disclose, disseminate, copy or print its contents. If you receive this
e-mail in
error, please notify the sender by reply e-mail and delete and destroy the
message.
[Non-text portions of this message have been removed] Received on Mon May 26 12:30:00 2003
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:00 EDT