RE: UK Material BS3602/35

From: <Jim>
Date: Mon May 26 2003 - 13:06:00 EDT

Elongation A106 Grade C
E=32t+6.50

where:
E=elongation in 2 in. or 50mm,%, and
t=actual thickness of specimen, in.

Be careful with these units, they are so old you have to blow the dust off of them.

> -----Original Message-----
> From: Samuel Liu [mailto:samuel.liu@amec.com]
> Sent: Monday, May 26, 2003 12:30 PM
> To: 'PipingDesign@yahoogroups.com'
> Subject: RE: [PipingDesign] UK Material BS3602/35
>
>
>
> Hi, Jim:
>
> Thank you for your inputs. Do you have more detailed information
> for the UK
> material, such as, detailed chemical composition and
> Tensile/Yield Strength
> & Elongation?
>
> Best Regards,
>
> Samuel
>
> -----Original Message-----
> From: Jim Hubbard [mailto:jhubbard@enercon.com]
> Sent: Monday, May 26, 2003 10:25 AM
> To: PipingDesign@yahoogroups.com
> Subject: RE: [PipingDesign] UK Material BS3602/35
>
>
> This is a comparison of US to BS piping specs if this helps.
>
> ASTM A 106 BS3602
> Grade A HFS 23
> Grade B HFS 27
> Grade C HFS 35
>
>
>
>
> > -----Original Message-----
> > From: Samuel Liu [mailto:samuel.liu@amec.com]
> > Sent: Monday, May 26, 2003 12:01 PM
> > To: 'PipingDesign@yahoogroups.com'
> > Subject: [PipingDesign] UK Material BS3602/35
> >
> >
> >
> > Hi, All:
> >
> > Does anyone know the spec (Chemical and mechanical properties)?
> > BS3602 Grade
> > 35 might be an out of dated standard, and I'm pretty sure that it is
> > different with existing BS3602-1 or 2.
> >
> > Samuel
> >
> >
> >
> > The information contained in this e-mail is intended only for the
> > individual or entity
> > to whom it is addressed. Its contents (including any
> > attachments) are confidential and
> > may contain privileged information. If you are not an intended
> > recipient you must not
> > use, disclose, disseminate, copy or print its contents. If you
> > receive this e-mail in
> > error, please notify the sender by reply e-mail and delete and
> > destroy the message.
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > =====================================================
> > Discussion List sponsor: The fluid flow calculations website -
> www.LMNOeng.com - LMNO Engineering,
> Research, and Software, Ltd.
> =====================================================
> unsubscribe: PipingDesign-unsubscribe@yahoogroups.com
> =====================================================
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
> =====================================================
> Discussion List sponsor: The fluid flow calculations website -
> www.LMNOeng.com - LMNO Engineering,
> Research, and Software, Ltd.
> =====================================================
> unsubscribe: PipingDesign-unsubscribe@yahoogroups.com
> =====================================================
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> The information contained in this e-mail is intended only for the
> individual or entity
> to whom it is addressed. Its contents (including any
> attachments) are confidential and
> may contain privileged information. If you are not an intended
> recipient you must not
> use, disclose, disseminate, copy or print its contents. If you
> receive this e-mail in
> error, please notify the sender by reply e-mail and delete and
> destroy the message.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> =====================================================
> Discussion List sponsor: The fluid flow calculations website -
www.LMNOeng.com - LMNO Engineering,
Research, and Software, Ltd.

---

unsubscribe: PipingDesign-unsubscribe@yahoogroups.com

---

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Received on Mon May 26 13:06:00 2003