RE: [Man.Distr]Re: RE: Exchange of Information

From: <Sajit>
Date: Fri Oct 24 2003 - 23:10:00 EDT

Dear Paul,

You are absolutely right. Let me add to that. Most of the people who ask all the questions are Indians (which includes myself) and those of you who answer them are from the west. Many questions are basic. There is also the deficiency in the expression of the question, more than the lack of knowledge of the English language. The answers are very good, thought out, fairly detailed. All of us must be using the info gleaned out of it to some benefit.

We look up to the west for our answers. I shall quote the professor of chemical engineering at the Indian Institute of Technology (IIT) Bombay, who also conducts the course in piping engineering. He was making a reference to the books and reference material available at the IIT library. "All of the material in here is written by our god-fathers", the west he meant. Also implying that the material were expensive and that they spend their major portion of their funding on them.

Sajit

-----Original Message-----
From: Paul Bowers [mailto:pbowers@pipingdesign.com] Sent: Thursday, October 23, 2003 11:54 AM To: PipingDesign@yahoogroups.com
Subject: [Man.Distr]Re: [PipingDesign] RE: Water Jet Ejectors

Maybe I should interject here as the list owner.

Most of the people that frequently contribute answers and suggestions on this list also work full-time on their own projects.

I have always hoped that this list would become an exchange of information, but often it seems to be a one-way transfer of knowledge.

When was the last documented time that anyone saved money from the use of this list?

Paul

• Original Message ----- From: "Shah Muhammad Tanweer" <smt_pk@yahoo.com> To: <PipingDesign@yahoogroups.com> Sent: Thursday, October 23, 2003 3:31 AM Subject: [PipingDesign] RE: Water Jet Ejectors

> Dear
> Steve McKenzie
>
> I remain thankful for your help. Can you guide me
> about the sizes if the water consumption is round
> about 1300 gpm. At example 5 and table 8 KARASSIK
> chapter 4, does not deel with high flow.
>
> Also please let me know What "SIZE" exactly mean. I
> mean what portion of ejector exactly
>
> Ever Yours
> Shah M. Tanweer

Yahoo! Groups Sponsor

ADVERTISEMENT   <http://rd.yahoo.com/M=194081.4074964.5287182.1261774/D=egroupweb/S=1705083319:H\ M/A=1706996/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=30509&media=\ atkins> click here   

<http://us.adserver.yahoo.com/l?M=194081.4074964.5287182.1261774/D=egroupmail/S=\ :HM/A=1706996/rand=540783522>

---

Discussion List sponsor: The fluid flow calculations website - www.LMNOeng.com - LMNO Engineering, Research, and Software, Ltd.

---

Information presented on this list is given as helpful advice, nonsense, carefully-considered calulation or any combination of the above. The intent is to spark discussion and encourage knowledge-sharing amongst professionals. If you blow yourself up by doing stuff remotely described by info gleaned from reading this list, you are an idiot.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed] Received on Fri Oct 24 23:10:00 2003