Are you referring to lab-type facilities? I'm not sure what specialty chem
is.
Most of my experience is petrochem/pulp and paper/cryogenics so I don't know much about the highly-specialized fields.
Paul
> That is my practice. I also usually throw in specialty chem, because
> it's the same size/scale.
>
> ... Bruce D. Bullough ...
> Sebesta Blomberg & Associates
> 2381 Rosegate
> Roseville, MN 55113 USA
> 651-634-7344 direct
> 651-634-7400 FAX
> www.sebesta.com
>
> -----Original Message-----
> From: Paul Bowers [mailto:pbowers@pipingdesign.com]
> Sent: Thursday, October 30, 2003 8:25 AM
> To: <a href="/group/PipingDesign/post?postID=uchPM6FNNrQ6ntYvJaAv2K5-aTjX-34m0hHdsAwmblseqxNjsJqEvGO0wPYIBzxY6WlVYqcRfCYoJF_GhNARyPX_FQ">PipingDesign@yahoogroups.com</a>
> Subject: Re: [PipingDesign] Straight runs for flowmeters
> [bcc][faked-from]
>
>
> Question for you: should the pharmaceutical, food and semiconductor
> industries (related to piping) be grouped together? All require extreme
> cleanliness, use SS and typically smaller bore piping is used.
>
> Paul
>
>
> ----- Original Message -----
> From: "Aaron Wolfe" <awolfe@muel.com>
> To: <PipingDesign@yahoogroups.com>
> Sent: Thursday, October 30, 2003 8:50 AM
> Subject: RE: [PipingDesign] Straight runs for flowmeters
>
>
> > I work in pharmaceutical piping mostly. The Flow meters that I've
> > used have a requirement for 3-6 OD's length of pipe upstream of the
> > instrument. What this does is get a more laminar flow out of the
> > product which provides better accuracy in measurement.
> >
> > Regards,
> >
> > Aaron Wolfe
> > Piping Designer
> > Paul Mueller Company
> > P.O. Box 828
> > Springfield, Mo 65801
> > (417) 575-9780
> > E-mail: <a href="/group/PipingDesign/post?postID=6hzaHtmR-lfnb-_levUewuYIBhl7kmRk8RGcEb4bcJJ3clCLqMc-aOsLzVk4oogiuBr5JMJZ">awolfe@muel.com</a>
Received on Thu Oct 30 09:47:00 2003
This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 11:40:30 EST