Re: European code - EN13480 - AutoPIPE 6.3

It appears that Barbara's information is slightly out of date concerning AutoPIPE, formerly by Rebis and now part of Bentley Systems.

AutoPIPE 6.3, released in May 2003 has a complete implementation of the European Code EN13480. It also had incorporated most materials listed in the standard including the creep properties. AutoPIPE is available as a Demo with a 20-node limit. Here is the press release from Bentley's web site:

<a href="http://www2.bentley.com/corporate/media_room/default.cfm?">http://www2.bentley.com/corporate/media_room/default.cfm?</a> objectid=C4DAF832-9671-41A0-82B739FF88B1CEF0&method=display

The link to requesting a demo is provided below. The web tour is slightly out of date:

<a href="http://www.bentley.com/products/disciplines/plant/engineering/autopipe">http://www.bentley.com/products/disciplines/plant/engineering/autopipe</a> /

If anybody is interested, I have a PowerPoint presentation about the Euro Code EN13480 in AutoPIPE.

Regards,

Karim Rinawi, Senior Software Developer, P.E., Ph.D. Bentley Systems Inc.

• In PipingDesign@yahoogroups.com, "James, Barbara" <bjames@m...> wrote:
  > Greetings all and best wishes for 2004.
  >
  > I am sorry, this isn't just a social call: I have just started on a
  > boiler refurbishment job for a refinery in Norway. The client has
  > suggested that we use the new European code for design, although the
  > plant was originally designed to ASME B31.1. I am naturally happy
  to
  > oblige, but I am having problems identifying suitable analysis
  software.
  > As far as I know, this is the current state of the major piping
  > programs:
  >
  > PSA5 have finished coding their EN13480 update and are writing the
  > manuals. Release scheduled for the end of January.
  > Caesar II - Version 4.50 released 11/03, EN13480 not listed in codes
  > supported
  > Autopipe - EN13480 not listed in codes supported
  > ADLPipe - EN13480 not listed in codes supported
  >
  > Does anyone on this forum know of any other software that currently
  > supports EN13480?
  >
  > On a slightly related topic; IIRC Christopher mentioned that he
  would
  > like to update one of the old programs to run on open source,
  ADLPipe
  > was one of the suggestions. ADLPipe is still alive and well,
  currently
  > owned by Research Engineers. I used it extensively from 1988 to
  1995
  > for design of Sizewell B PWR. We had a version that ran on Unix,
  it was
  > fast and flexible, certainly the easiest program I have used for
  MRSS
  > and ASME III NB. I have also used Version 9.0 for Windows, which
  > combined graphical input with the option to swap to text input at
  any
  > time. It is currently at Version 10.0, which I have not used.
  >
  > ADLPipe still runs on a variety of platforms:
  >
  > Operating Systems
  > DOS
  > Windows 3.1/95/NT
  > Unix Workstations - HP9000/700, SUN/SPARC
  > VAX/VMS and Alpha/VMS
  > CRAY/UNICOS
  > IBM/MVS and IBM/VM
  >
  > <a href="http://www.reiworld.com/Product/ADLPIPE/ADLPIPE.asp">http://www.reiworld.com/Product/ADLPIPE/ADLPIPE.asp</a>
  >
  > I hope that is of interest.
  >
  > Barbara
  >
  >
  >
  > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  
  • -
    > -
    > IMPORTANT NOTICE.
    >
    > This E-Mail and any files transmitted with it, are confidential and
    may
    > be
    > privileged and are for the exclusive use of the intended recipient
    (s).
    > If you are not the intended recipient(s) please note that any form
    > of distribution, copying or use of this communication or the
    > information in it, is strictly prohibited and may be unlawful.
    >
    > If you have received this E-Mail in error please return it to the
    > sender.
    > We should be grateful if you would also copy the communication to
    > postmaster@m... then delete the E-Mail and destroy any
    > copies of it.
    >
    > It is your responsibility to scan any attachments for viruses.
    >
    > For further information, visit us at WWW.MITSUIBABCOCK.COM