Before ASME came into existance , somewhere in 1919, Taylor Forge had
standardised on flanges it made and had calculated the rating to be 150 and 300
lbs per sq in. Later these flange dimensions were adopted as standard by ASME.
However much research (and many Ph.Ds) went to material properties and failure
of flanges and for the same dimensions the pressure capabilities were increased.
Thus 150 lbs flanges could withstand 285 psi now . For interchangebility
consideratins dimensions were never changed. Thus we have 150 lb etc but with
pressure capabilities varying. In times to come with better material and
research this may become more.
This is what I had learnt when I joined the industry and remember having read it in some historical article
Ponnu
GET Mithapur <getuser@tatachemicals.com> wrote:
To all Piping Engg.
I would like to know what does Class denote in Class 150 Flange rating. On
referring ANSI B16.5, Table 2, for Class 150, Mat. Grp. 1.1, Temp. 100F, the
pressure rating is 285psi.
Then, does it mean that a class 150 flange for that particular group of
materials can be utilized upto a pressure of 285 psi. I am a fresher who
has just joined a Chemical Manufacturing company.
Do clarify this doubt. And also how the term Class came into existence.
Regards.
Yahoo! Groups SponsorADVERTISEMENT
To visit your group on the web, go to: <a href="http://groups.yahoo.com/group/PipingDesign/">http://groups.yahoo.com/group/PipingDesign/</a>
To unsubscribe from this group, send an email to: <a href="/group/PipingDesign/post?postID=2bsPDWM7iQVABwjEa36i5A4pWDychM3vN_Zf8rLLJ_W2JoSgTtIFMSORIKVOoKY1F7GFyiDosQKvgojvAx0IszVVkFyHYoFJe_c4xi41">PipingDesign-unsubscribe@yahoogroups.com</a>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed] Received on Sat May 08 02:08:00 2004
This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 11:40:34 EST