Jay,
I am sorry, I have left pout a piece or key info. We are generally working with UPVC or MPVC pipe work and associated fittings with ratings up to Pn 12.5 (Bar) or greater and using high pressure solvent cement.
Cheers,
Robin
> Thanks for the info Robin...
>
>
> Robin Badcock <rbadcock@vision.net.au> wrote:
> Hi Jay,
>
> You will need to fit a 4" PVC valve socket and glue this to your existing
> pipe work after correct preparation and priming of the joint. This valve
> socket then leaves you with a male thread that you merely fit a threaded
> socket of the desired material you wish to use and then screw a male hose
> tail into the socket. Be sure to use a double beaded thick walled tail
> assembly (that is undercut at the bead area) so as you can fit decent
heavy
> duty clamps made from 3/8 rod style construction fitted opposite each
other
> (180 degrees) on the tail end.
>
> We have used such methods on 6" and larger flexible piping systems with
zero
> failure up to 150 psi at times.
>
> Hope this helps.
>
> Cheers,
>
> Robin.
>
>
> ----- Original Message -----
> From: "jay aguilar" <jhayaguilar73@yahoo.com>
> To: <PipingDesign@yahoogroups.com>
> Sent: Sunday, July 11, 2004 8:26 AM
> Subject: Re: [PipingDesign]
>
>
> > Good Day !
> >
> > Anybody knows how to connect or install 4" flexible tube to a 4" pvc
> pipe?...
> > We have difficulty in connecting these...Any techniques or special
> applications?.
> >
> > Thanks,
> >
> > Jay
> >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > <a href="http://mail.yahoo.com">http://mail.yahoo.com</a>
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > =========================================
> > PipingOffice - Excel Spreadsheets for Piping Calculations
> > <a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a>
> > =========================================
> > Main site: <a href="http://www.pipingdesign.com">http://www.pipingdesign.com</a>
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> =========================================
> PipingOffice - Excel Spreadsheets for Piping Calculations
> <a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a>
> =========================================
> Main site: <a href="http://www.pipingdesign.com">http://www.pipingdesign.com</a>
>
>
>
> Yahoo! Groups SponsorADVERTISEMENT
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> <a href="http://groups.yahoo.com/group/PipingDesign/">http://groups.yahoo.com/group/PipingDesign/</a>
>
> To unsubscribe from this group, send an email to:
> <a href="/group/PipingDesign/post?postID=wkLxllgrQWqhNXohv23j5ikKTc1D7SHqeCEL4HyKknBLvBVhO0A4UG311CZHFp1h_e8xCS7YaYCuS3hTrMmtXIYslhAd4oN_nNxIHoJBGNdwxw">PipingDesign-unsubscribe@yahoogroups.com</a>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> ---------------------------------
> Do you Yahoo!?
> New and Improved Yahoo! Mail - Send 10MB messages!
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> =========================================
> PipingOffice - Excel Spreadsheets for Piping Calculations
> <a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a>
> =========================================
> Main site: <a href="http://www.pipingdesign.com">http://www.pipingdesign.com</a>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Received on Mon Jul 12 03:06:00 2004
This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 11:40:35 EST