Robert,
No problem, one of the few things on this board that I actually feel like I
know something about!
Our Spool dept. would tag each spool with linenumber and spool number, if
one was assigned. Additionally a packet including the shop router and all
drawings associated with the line (isos, orthos, etc.) followed it through
the shop all the way through assembly.
-----Original Message-----
From: l_c_y1999 [mailto:l_c_y1999@yahoo.com]
Sent: Wednesday, October 20, 2004 9:40 PM
To: <a href="/group/PipingDesign/post?postID=UDCCWkeCE8shViCDAUKuAPmbsE6SkPw0YOk3L-l5DUcblhm2BJf5RIrYQQtByjHrxX64Dm1j0rxbXQoM8ygKwqoGVuIU">PipingDesign@yahoogroups.com</a>
Subject: [PipingDesign] Re: Piping spool number and isometric break
Thanks Aaron, that's exactly what I like and hope to hear. So in your sppol
dept. Are they going to attch 2 tag numbers on this BIG spool before it
leaves for site? (Since this BIG spool is created by weld 2 spools together)
Thanks again and have a nice day (night?)
Robert Liu
- In PipingDesign@yahoogroups.com, "Aaron Wolfe"
<aaronwolfeman@h...> wrote:
> When I was working in a production environment if I released an
iso that did
> not have a "field weld" symbol on a weld it was a shop weld,
whether the
> line had 2 sheets or not. Most software platforms for piping
design allow
> the option to place a weld as field or shop in the model that will
be
> extracted onto an iso. We has a spool dept. that would weld up
each sheet
> individually, then in the final production assembly, before it
left our
> shop, the weld to connect the two spools would be welded.
>
> -----Original Message-----
> From: l_c_y1999 [mailto:l_c_y1999@y...]
> Sent: Wednesday, October 20, 2004 12:16 AM
> To: <a href="/group/PipingDesign/post?postID=UDCCWkeCE8shViCDAUKuAPmbsE6SkPw0YOk3L-l5DUcblhm2BJf5RIrYQQtByjHrxX64Dm1j0rxbXQoM8ygKwqoGVuIU">PipingDesign@yahoogroups.com</a>
> Subject: [PipingDesign] Piping spool number and isometric break
>
>
>
> Dear member,
>
> Have you ever experienced such probelem like: Isometric has to be
broken up
> (It's a common problem now because Cad software been used widely,
how much
> informaion can be put into one iso is pretty much out of control
of human
> being.) but the inter-iso weld does not need to be a field weld
(Shop weld
> saves some bucks).
>
> And the most Spool ID naming system (sometime called Mark peice
No.) consist
> isometric mumber (i.e 52P122-SHT1-01, 02...), So under all these
> circumstances I get 2 Spool IDs even though I want the inter- iso
weld to be
> done in shop.
>
> Is this a probelem at all? I mean maybe the shop people wounld be
confused
> and they will fab these two spool and weld then together then ship
it to
> site with 2 SPOOL TAG No. with it?
>
> Or the shop people do get confused?
>
> What's your onpin on this?
>
> Cheers
>
> Robert Liu
>
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor --------------------
~-->
> $9.95 domain names from Yahoo!. Register anything.
> <a href="http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/3GYolB/TM">http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/3GYolB/TM</a>
> -------------------------------------------------------------------
-~->
>
> =========================================
> PipingOffice - Excel Spreadsheets for Piping Calculations
> <a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a>
> Main site: <a href="http://www.pipingdesign.com">http://www.pipingdesign.com</a>
>
> Yahoo! Groups Links
PipingOffice - Excel Spreadsheets for Piping Calculations
<a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a> =========================================
Main site: <a href="
http://www.pipingdesign.com">
http://www.pipingdesign.com</a>
Yahoo! Groups Links
Received on Thu Oct 21 12:09:00 2004