Re: Piping spool number and isometric break

Thanks Aaron, that's exactly what I like and hope to hear. So in your sppol dept. Are they going to attch 2 tag numbers on this BIG spool before it leaves for site? (Since this BIG spool is created by weld 2 spools together)

Thanks again and have a nice day (night?)

Robert Liu

• In PipingDesign@yahoogroups.com, "Aaron Wolfe" <aaronwolfeman@h...> wrote:
  > When I was working in a production environment if I released an
  iso that did
  > not have a "field weld" symbol on a weld it was a shop weld,
  whether the
  > line had 2 sheets or not. Most software platforms for piping
  design allow
  > the option to place a weld as field or shop in the model that will
  be
  > extracted onto an iso. We has a spool dept. that would weld up
  each sheet
  > individually, then in the final production assembly, before it
  left our
  > shop, the weld to connect the two spools would be welded.
  >
  > -----Original Message-----
  > From: l_c_y1999 [mailto:l_c_y1999@y...]
  > Sent: Wednesday, October 20, 2004 12:16 AM
  > To: PipingDesign@yahoogroups.com
  > Subject: [PipingDesign] Piping spool number and isometric break
  >
  >
  >
  > Dear member,
  >
  > Have you ever experienced such probelem like: Isometric has to be
  broken up
  > (It's a common problem now because Cad software been used widely,
  how much
  > informaion can be put into one iso is pretty much out of control
  of human
  > being.) but the inter-iso weld does not need to be a field weld
  (Shop weld
  > saves some bucks).
  >
  > And the most Spool ID naming system (sometime called Mark peice
  No.) consist
  > isometric mumber (i.e 52P122-SHT1-01, 02...), So under all these
  > circumstances I get 2 Spool IDs even though I want the inter- iso
  weld to be
  > done in shop.
  >
  > Is this a probelem at all? I mean maybe the shop people wounld be
  confused
  > and they will fab these two spool and weld then together then ship
  it to
  > site with 2 SPOOL TAG No. with it?
  >
  > Or the shop people do get confused?
  >
  > What's your onpin on this?
  >
  > Cheers
  >
  > Robert Liu
  >
  >
  >
  >
  >
  >
  > ------------------------ Yahoo! Groups Sponsor --------------------
  ~-->
  > $9.95 domain names from Yahoo!. Register anything.
  > http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/3GYolB/TM
  > -------------------------------------------------------------------
  -~->
  >
  > =========================================
  > PipingOffice - Excel Spreadsheets for Piping Calculations
  > http://www.pipingoffice.us/
  

  ---

  
  > Main site: http://www.pipingdesign.com
  >
  > Yahoo! Groups Links