Re: Allowable Reaction Loads on Drums

From: <Venkat>
Date: Sun Oct 24 2004 - 03:33:00 EDT

pretei_28@yahoo.com wrote:

>Does any one have a table for "Allowable Reaction >Loads" specifically
>on K.O. Drums for 54" & 48" size Flare lines?

No ready made table is available for pressure vessel nozzle loads like the ones available for air cooler and rotating equipment nozzle loads. The allowable external loads for the vessel to nozzle intersection and the nozzle to piping interface need to be calculated for each nozzle and the forces and moments exerted by the piping system on these nozzles to be kept below these values. See below articles in Chemical Engineering for further details.

1. Proper interface design for pressure vessels - June 1994
2. Piping reactions on pressure vessel nozzles - July 1986.

Computer programs like PV Elite and Compress have provisions to input external loads(external forces and moments) for flange design.

Venkat

---

PipingOffice - Excel Spreadsheets for Piping Calculations http://www.pipingoffice.us/

---

Main site: http://www.pipingdesign.com

Yahoo! Groups SponsorADVERTISEMENT

---

Yahoo! Groups Links

    To visit your group on the web, go to: http://groups.yahoo.com/group/PipingDesign/

    To unsubscribe from this group, send an email to: PipingDesign-unsubscribe@yahoogroups.com

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! India Matrimony: Find your life partneronline.

[Non-text portions of this message have been removed] Received on Sun Oct 24 03:33:00 2004