RE: Pipe lateral connection software

From: <Steve>
Date: Tue Oct 26 2004 - 16:05:00 EDT

Hi Adam
living near the end of the earth means I do not have immediate access to such lovelies as preformed laterals. Don't need reinforcement as pressure is only 500kPa and we are using Std weight pipe. Have reluctantly changed my design to tee connections in order to reduce the chances of a stuff up. The whole thing (pumping installation) will be finished in 9 days, so we will see.
Still interested in the software though.

Cheers

Steve

-----Original Message-----
From: Adam Schuehle [mailto:ajschuehle@hotmail.com] Sent: Wednesday, October 27, 2004 6:42 AM To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] Pipe lateral connection software

I would think you would want to use a standard fitting such as a WFI Lateral
Pipet. I'm sure they would provide installation guidelines for your confused pipefitters. You would want the extra reinforcement at the connection rather than your typical stub-in.

>From: "ed engalan" <edengalan@hblpipe.com>
>Reply-To: PipingDesign@yahoogroups.com
>To: <PipingDesign@yahoogroups.com>
>Subject: RE: [PipingDesign] Pipe lateral connection software
>Date: Tue, 26 Oct 2004 11:36:48 -0400
>
>They are available as standard fitting! If you have a Tube Turn or
>Weldbend Catalogs, they are offered as Straight and reducing buttwelded

>laterals.
>
>
>
>
>-----Original Message-----
>From: Sajit Viswan [mailto:sviswan@tebodin.co.om]
>Sent: Tuesday, October 26, 2004 2:55 AM
>To: PipingDesign@yahoogroups.com
>Subject: RE: [PipingDesign] Pipe lateral connection software
>
>
>
>Wonder why these laterals are not offered as a fitting. There are
>flanged laterals as std in ASME B 16.5.
>
>Sajit
>
>-----Original Message-----
>From: Al [mailto:alwynk@shaw.ca]
>Sent: Tuesday, October 26, 2004 10:10 AM
>To: PipingDesign@yahoogroups.com
>Subject: RE: [PipingDesign] Pipe lateral connection software
>
>
>theres a couple.
>jim has access to one www.codecad.com
>
>
>
>
>-----Original Message-----
>From: Steve McKenzie [mailto:mechproj@xtra.co.nz]
>Sent: Monday, October 25, 2004 10:54 PM
>To: PipingDesign@yahoogroups.com
>Subject: [PipingDesign] Pipe lateral connection software
>
>
>
>
>Gents
>
>I need to make some 200X300NB lateral connections at and angle of about

>45 degrees. The local pipe guys are struggling with the development of
>the hole and pipe end profile.
>Some time ago I saw a computer program which printed the developments
>on paper.
>You then just cut them out, pasted them to the pipe, centre popped
>and gas cut the profile.
>
>
>Does anyone know the name of the programme?
>
>Cheers
>
>Steve
>
>
>
>
>
>
>=========================================
>PipingOffice - Excel Spreadsheets for Piping Calculations
>http://www.pipingoffice.us/ =========================================
>Main site: http://www.pipingdesign.com
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>=========================================
>PipingOffice - Excel Spreadsheets for Piping Calculations
>http://www.pipingoffice.us/ =========================================
>Main site: http://www.pipingdesign.com
>
>
>
>
>Yahoo! Groups Sponsor
>
>ADVERTISEMENT
>
><http://us.ard.yahoo.com/SIG=129tqc6bv/M=315388.5526708.6599542.3001176
>/
>D=groups/S=1705083319:HM/EXP=1098856936/A=2372354/R=0/SIG=12id813k2/*ht
t
>ps://www.orchardbank.com/hcs/hcsapplication?pf=PLApply&media=EMYHNL40F2
1
>004SS> click here
>
><http://us.adserver.yahoo.com/l?M=315388.5526708.6599542.3001176/D=grou
>p
>s/S=:HM/A=2372354/rand=313872937>
>
>
> _____
>
>Yahoo! Groups Links
>
>
>* To visit your group on the web, go to:
>http://groups.yahoo.com/group/PipingDesign/
>
>
>* To unsubscribe from this group, send an email to:
>PipingDesign-unsubscribe@yahoogroups.com
><mailto:PipingDesign-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>
>* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>Service <http://docs.yahoo.com/info/terms/> .
>
>
>
>"This email message is intended for the named recipient only.It may be
>privileged and/or confidential.If you are not the intended named
>recipient of this email then you should not copy it or use it for any
>purpose, nor disclose its contents to any other person which is
>strictly prohibited and unlawful"
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>=========================================
>PipingOffice - Excel Spreadsheets for Piping Calculations
>http://www.pipingoffice.us/ =========================================
>Main site: http://www.pipingdesign.com
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>[Non-text portions of this message have been removed]
>

---

FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

---

PipingOffice - Excel Spreadsheets for Piping Calculations

http://www.pipingoffice.us/ =========================================

Main site: http://www.pipingdesign.com

Yahoo! Groups Links Received on Tue Oct 26 16:05:00 2004