RE: Pump''s Power Curve

From: <Erik>
Date: Tue Dec 07 2004 - 03:15:00 EST

The power curve on the datasheet of the pump refers to the power requirement at the pumpshaft.
The power requirement for the electric motor is obtained by dividing by the efficiencies of both the motor and the transmission. Frequency invertors and thyristor controllers for DC motors must be included.
The overall efficiency is also called "wire to water efficiency".

Example:         kW at motor :56.94
                         Motor and tansmission efficiency:91.96%
                         kW at pumpshaft: 52.36

Erik

---

Van: cckla [mailto:cckla@pd.jaring.my] Verzonden: dinsdag 7 december 2004 6:26
Aan: <a href="/group/PipingDesign/post?postID=vykxw0BtWlTZ_TwMJLn0CXQk1hfxBNMG_rJWGyLNVRl8Ipi4Gzw93BGcMt9kXoOAdhui8fen28PGkTuXPsHpnntufak2t4w">PipingDesign@yahoogroups.com</a> Onderwerp: [PipingDesign] Pump's Power Curve

Dear all specialists,

Do you know whether the power curve for a pump is referring to the motor's power or pump's power needed ?

If I measured the incoming voltage and current to the motor, is there any formula to calculate the power as in the power curve ?

Please guide me.

Regards,
cckla

---

PipingOffice - Excel Spreadsheets for Piping Calculations
<a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a>

---

Main site: <a href="http://www.pipingdesign.com">http://www.pipingdesign.com</a>

Yahoo! Groups Sponsor

ADVERTISEMENT
<<a href="http://us.ard.yahoo.com/SIG=129jdrlp0/M=295196.4901138.6071305.3001176/D=gr">http://us.ard.yahoo.com/SIG=129jdrlp0/M=295196.4901138.6071305.3001176/D=gr</a>
oups/S=1705083319:HM/EXP=1102483619/A=2128215/R=0/SIG=10se96mf6/*<a href="http://comp">http://comp</a> anion.yahoo.com> click here

<<a href="http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=">http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=</a>
:HM/A=2128215/rand=567044596>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  <a href="http://groups.yahoo.com/group/PipingDesign/">http://groups.yahoo.com/group/PipingDesign/</a>
  
• To unsubscribe from this group, send an email to:
  <a href="/group/PipingDesign/post?postID=k_jRgzG3xgxspt3hucWnI-WBfd0SeTcc_yb9n6Qc7oCIs92DTEm8B7gbW3HljFju1_vGCXRprMACU0ULpMRqeATThaKIIq3p3YvGAwH-NnXGmOY">PipingDesign-unsubscribe@yahoogroups.com</a>
  <mailto:PipingDesign-unsubscribe@yahoogroups.com?subject=Unsubscribe>
  
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
  <http://docs.yahoo.com/info/terms/> .
  

[Non-text portions of this message have been removed] Received on Tue Dec 07 03:15:00 2004