RE: Hot Tapping

From: <sankalp.mathur@fluor.com>
Date: Wed Feb 14 2007 - 02:05:00 EST

Hi Randy,

Well i guess you are right I did not receive any tangible info on "split wye" type tapping !!

Actually we do not want the flow to hit the (rusty old) header wall squarely and so comes in the wye type tap.

But i guess i will have to wait for something more tangile to come up !!

Thanks & Best Regards,

Sankalp

Fluor Daniel

"Conner, Randy" <RConner@acipco.com>
Sent by: <a href="/group/PipingDesign/post?postID=e3CmzPo-yVQLQ8OV8M4tAl4WnFAPxj6EKR_6uzh0EolFzKXlPHErlDMvn1_DKOG6pquoicQXNmpB3iHyKo-bCICSDpgwiss">PipingDesign@yahoogroups.com</a> 02/09/2007 08:11 PM
Please respond to PipingDesign

To
<PipingDesign@yahoogroups.com> cc

Subject
RE: [PipingDesign] Hot Tapping

While we can supply some "wye" outlets factory-welded on pipes, I have not before seen wye pressure taps (nor readily available sleeves made to accomplish same) --- while what you are looking for may well be out there, and I will wait to see, I just thought I'd ask if there is there any possibility you could make a conventional lateral hot tap with conventional equipment/procedure a little to the side of your intersection point, then bolt a 45 bend onto the branch tapping valve?

Randy Conner, ACIPCO

---

From: <a href="/group/PipingDesign/post?postID=e3CmzPo-yVQLQ8OV8M4tAl4WnFAPxj6EKR_6uzh0EolFzKXlPHErlDMvn1_DKOG6pquoicQXNmpB3iHyKo-bCICSDpgwiss">PipingDesign@yahoogroups.com</a> [mailto:<a href="/group/PipingDesign/post?postID=e3CmzPo-yVQLQ8OV8M4tAl4WnFAPxj6EKR_6uzh0EolFzKXlPHErlDMvn1_DKOG6pquoicQXNmpB3iHyKo-bCICSDpgwiss">PipingDesign@yahoogroups.com</a>] On Behalf Of <a href="/group/PipingDesign/post?postID=tYajSKfVIPmvZiYfDSUKeCZIeXvCDKe5Iik8zrDoDH-7ohZ-mhExa9briHY52nkviJh9AVuuOYqGXhlXl6B9ZCWzIQ">sankalp.mathur@fluor.com</a> Sent: Thursday, February 08, 2007 11:24 PM To: <a href="/group/PipingDesign/post?postID=e3CmzPo-yVQLQ8OV8M4tAl4WnFAPxj6EKR_6uzh0EolFzKXlPHErlDMvn1_DKOG6pquoicQXNmpB3iHyKo-bCICSDpgwiss">PipingDesign@yahoogroups.com</a> Subject: [PipingDesign] Hot Tapping

Hi,

I am looking for information on Hot Tapping in a ductile iron header with
"Split Wye" instead of split tee.

I would be grateful if anyone can guide me to some web site providing info
on "split wye" hot-tapping.

Thanks & Best Regards,

Sankalp

Fluor Daniel

---

The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, business-confidential and/or privileged material. If you are not the intended recipient of this message you are hereby notified that any use, review, retransmission, dissemination, distribution, reproduction or any action taken in reliance upon this message is prohibited. If you received this in error, please contact the sender and delete the material from any computer. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of the company.

---

_________Confidentiality Notice_______________________

This e-mail and any files transmitted with it is confidential and is intended solely for the use of the individual(s) or entity(ies) to whom this e-mail is addressed. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, be advised that you have received this e-mail in error, and that any use, disclosure, dissemination, forwarding, printing, retention or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately return this e-mail to the sender and delete the e-mail from your system. Thank you.

[Non-text portions of this message have been removed] Received on Wed Feb 14 02:05:00 2007