I have a contact (known him for 25 years) at Rosemount in case you hit a wall.
Paul
bruce.r.raymond@fluor.com wrote:
> Paul - I recently checked for the elbow mounting recommendations for
> annubar & to my surprise that info has been deleted from the latest info -
> FYI the old elbow installation requirements were 2D upstream of pipe
> center ( 1/2D from ellbow weld seam)& 2D downstream. I'll have to contact
> rosemount & verify if they still "allow" the old type of installation
> http://www.mjwilsongroup.com/mjwilson/downloads/flow/annubarflow.pdf
> Bruce Raymond
> Senior Design Supervisor
> Fluor Daniel South America
Received on Sun Aug 12 08:38:00 2007
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:13 EDT