Re: join the carbon steel pipe to plastic pipe

From: <bruce.r.raymond@fluor.com>
Date: Tue Aug 21 2007 - 06:48:00 EDT

Murthi - 1st I must presume that you have PVC or PVDC pipe, as far as joining systems are you imperial or metric "plastic pipe"? if imperial you can join by: 1) flanges, 2) threaded carbon steel to female threaded plastic coupling (sch.80 to prevent cracking), or 3) by a "dresser" style bolt on coupling. what is your application? Bruce R.Raymond
Senior Design Supervisor
  Fluor

"murthi_pri" <murthi_pri@yahoo.com>
Sent by: PipingDesign@yahoogroups.com
08/20/2007 09:49 AM
Please respond to PipingDesign

To
PipingDesign@yahoogroups.com
cc

Subject
[PipingDesign] join the carbon steel pipe to plastic pipe

Dear guys,

i have one doubt...

what are the three methods available to join the carbon steel pipe to plastic pipe?

thanks and regards,
murthi

---

The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, business-confidential and/or privileged material. If you are not the intended recipient of this message you are hereby notified that any use, review, retransmission, dissemination, distribution, reproduction or any action taken in reliance upon this message is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of the company.

---

[Non-text portions of this message have been removed]
Received on Tue Aug 21 06:48:00 2007