Re: [PipingDesign] Fw: Ball Valve seat

From: <Tuberias>
Date: Tue Jul 16 2002 - 18:25:00 EDT

Peek is better then Devlon ,
but my ball valve chart, has it that is safe till 180° C at 2500psi. . You are on the limit.
And also take acount that different factorys use diferent safty margins. My advise. 1500psi ok devlon
at 2500 psi peek .

Arturo Murillo
----- Original Message -----
From: "Paul Bowers" <pbowers@pipingdesign.com> To: <PipingDesign@yahoogroups.com>
Cc: <borhan_said@hotmail.com>
Sent: Tuesday, July 16, 2002 1:47 PM
Subject: [PipingDesign] Fw: Ball Valve seat

>
>
> ----- Original Message -----
> From: "Borhan Said" <borhan_said@hotmail.com>
> To: <PipingDesign-owner@yahoogroups.com>
> Sent: Tuesday, July 16, 2002 9:16 AM
> Subject: Ball Valve seat
>
>
> Hi everyone,
>
> Any one knows, ball valve of 1500lbs and 2500lb - devlon seat can stand to
> 160 deg C and above.
> If not, can peek seat suitable for this.
> Please advise.
>
> Regards
> Borhan
>
>
>
>
>
> _____________________________________________________
> Unsubscribe: PipingDesign-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Received on Tue Jul 16 18:25:00 2002

This archive was generated by hypermail 2.1.8 : Tue Mar 09 2010 - 00:20:35 EST