Dear Karim,
I am very much interested in the PPT presentation on EN13480. In addition, I would appreciate if you assist on purchasing AutoPIPE. How much does it cost? Perpetual vs. license.
Your prompt reply will be highly appreciated.
>
> It appears that Barbara's information is slightly out of date
> concerning AutoPIPE, formerly by Rebis and now part of Bentley
> Systems.
>
> AutoPIPE 6.3, released in May 2003 has a complete implementation of
> the European Code EN13480. It also had incorporated most materials
> listed in the standard including the creep properties. AutoPIPE is
> available as a Demo with a 20-node limit. Here is the press release
> from Bentley's web site:
>
>
>
> http://www2.bentley.com/corporate/media_room/default.cfm?
> objectid=C4DAF832-9671-41A0-82B739FF88B1CEF0&method=display
>
>
>
> The link to requesting a demo is provided below. The web tour is
> slightly out of date:
>
>
>
> http://www.bentley.com/products/disciplines/plant/engineering/autopipe
> /
>
>
>
> If anybody is interested, I have a PowerPoint presentation about the
> Euro Code EN13480 in AutoPIPE.
>
>
>
> Regards,
>
> Karim Rinawi, Senior Software Developer, P.E., Ph.D.
> Bentley Systems Inc.
>
>
> --- In PipingDesign@yahoogroups.com, "James, Barbara" <bjames@m...>
> wrote:
> > Greetings all and best wishes for 2004.
> >
> > I am sorry, this isn't just a social call: I have just started on a
> > boiler refurbishment job for a refinery in Norway. The client has
> > suggested that we use the new European code for design, although the
> > plant was originally designed to ASME B31.1. I am naturally happy
> to
> > oblige, but I am having problems identifying suitable analysis
> software.
> > As far as I know, this is the current state of the major piping
> > programs:
> >
> > PSA5 have finished coding their EN13480 update and are writing the
> > manuals. Release scheduled for the end of January.
> > Caesar II - Version 4.50 released 11/03, EN13480 not listed in codes
> > supported
> > Autopipe - EN13480 not listed in codes supported
> > ADLPipe - EN13480 not listed in codes supported
> >
> > Does anyone on this forum know of any other software that currently
> > supports EN13480?
> >
> > On a slightly related topic; IIRC Christopher mentioned that he
> would
> > like to update one of the old programs to run on open source,
> ADLPipe
> > was one of the suggestions. ADLPipe is still alive and well,
> currently
> > owned by Research Engineers. I used it extensively from 1988 to
> 1995
> > for design of Sizewell B PWR. We had a version that ran on Unix,
> it was
> > fast and flexible, certainly the easiest program I have used for
> MRSS
> > and ASME III NB. I have also used Version 9.0 for Windows, which
> > combined graphical input with the option to swap to text input at
> any
> > time. It is currently at Version 10.0, which I have not used.
> >
> > ADLPipe still runs on a variety of platforms:
> >
> > Operating Systems
> > DOS
> > Windows 3.1/95/NT
> > Unix Workstations - HP9000/700, SUN/SPARC
> > VAX/VMS and Alpha/VMS
> > CRAY/UNICOS
> > IBM/MVS and IBM/VM
> >
> > http://www.reiworld.com/Product/ADLPIPE/ADLPIPE.asp
> >
> > I hope that is of interest.
> >
> > Barbara
> >
> >
> >
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - -
> > -
> > IMPORTANT NOTICE.
> >
> > This E-Mail and any files transmitted with it, are confidential and
> may
> > be
> > privileged and are for the exclusive use of the intended recipient
> (s).
> > If you are not the intended recipient(s) please note that any form
> > of distribution, copying or use of this communication or the
> > information in it, is strictly prohibited and may be unlawful.
> >
> > If you have received this E-Mail in error please return it to the
> > sender.
> > We should be grateful if you would also copy the communication to
> > postmaster@m... then delete the E-Mail and destroy any
> > copies of it.
> >
> > It is your responsibility to scan any attachments for viruses.
> >
> > For further information, visit us at WWW.MITSUIBABCOCK.COM
>
>
>
> =========================================
> Main site: http://www.pipingdesign.com
> http://www.pipingdesign.org
> http://www.pipingdesign.ca
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/PipingDesign/
>
> To unsubscribe from this group, send an email to:
> PipingDesign-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
Received on Fri Jan 09 08:48:00 2004
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:02 EDT