We are a Design and Fabrication Company. Here's our shop fabrication
standard
that we use for pipe ends (used for cutting and finishing):
PE- Plain both ends
BE- Beveled both ends
GE- Grooved both ends
TE- Threaded both ends
PE- Plain ends are normally used for random lenghts (to be cut later), butt-welded S/S connection,
slip-on-flange attachment, etc.
BE- Beveled ends are normally used for butt-welded C/S connection, weld neck C/S flanges, etc.
GE- Grooved ends are used for grooved coupling connection, victaulic, gruv-lok, etc.
TE- Threaded ends are used for screwed connections
Variations/Combinations :
PBE- Plain one end and beveled the other
PGE- Plain one end and grooved the other
PTE- Plain one end and threaded the other
BGE- Beveled one end and grooved the other
BTE- Beveled one end and threaded the other
GTE- Grooved one end and threaded the other
Notes :
1.) We do not specify left or right because these are readily traced from the Fabrication Drawings.
2.) If pipe ends are different, both shall be specified.
3.) We found this standard simple, natural and easy to remember.
Hope this helps our starter members.
-----Original Message-----
From: Aaron Wolfe [mailto:aaronwolfeman@hotmail.com]
Sent: Wednesday, March 03, 2004 11:17 AM
To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] End Connection Abbreviations
Here's a list of end connection abbreviations that we use. Covers a broad range of industries.Biopharm, petro-chem, civil, fire-protection, hvac, conduit, even residential.
Hope this helps
[BW]
Name = BW
Description = Butt-Weld End
[BWT]
Name = BWT
Description = HiPurity Butt-Weld End
[BWF]
Name = BWF
Description = Butt-Weld Female End
[BV]
Name = BV
Description = Beveled End
[PL]
Name = PL
Description = Plain End
[SWF]
Name = SWF
Description = Socket-Weld Female End
[SOF]
Name = SWF
Description = Socket-Weld Female End
[SWM]
Name = SWM
Description = Socket-Weld Male End
[STF]
Name = STF
Description = HiPurity Socket-Weld Female End
[STM]
Name = STM
Description = HiPurity Socket-Weld Male End
[CPF]
Name = CPF
Description = Compression Female End
[CPM]
Name = CPM
Description = Compression Male End
[FAF]
Name = FAF
Description = Swagelok Flare AN Female End
[FAM]
Name = FAM
Description = Swagelok Flare AN Male End
[TFF]
Name = TFF
Description = Tubing Fitting Flare AN Female End
[SFF]
Name = SFF
Description = Swagelok Flare Female End
[SFM]
Name = SFM
Description = Swagelok Flare Male End
[SCF]
Name = SCF
Description = Threaded Female End
[SCM]
Name = SCM
Description = Threaded Male End
[SRF]
Name = SRF
Description = Swagelok Straight Thread Female End
[SRM]
Name = SRM
Description = Swagelok Straight Thread Male End
[FLG]
Name = FL
Description = Flanged End
[FLL]
Name = FLL
Description = Flanged Lined End
[WAF]
Name = WAF
Description = Wafer End
[WFL]
Name = WFL
Description = Wafer Lined End
[LUG]
Name = LUG
Description = Lug End
[LGL]
Name = LGL
Description = Lug Lined End
[LAP]
Name = LAP
Description = Lap Joint End
[LPL]
Name = LPL
Description = Lap Joint Lined End
[TCF]
Name = TCF
Description = HiPurity Clamp Female End
[TCM]
Name = TCM
Description = HiPurity Clamp Male End
[ICM]
Name = ICM
Description = HiPurity I Clamp Male End
[ICF]
Name = ICF
Description = HiPurity I Clamp Female End
[QCM]
Name = QCM
Description = HiPurity Quick Clamp Male End
[QCF]
Name = QCF
Description = HiPurity Quick Clamp Female End
[TBF]
Name = TBF
Description = HiPurity Threaded-Bevel Female End
[TBM]
Name = TBM
Description = HiPurity Threaded-Bevel Male End
[EJF]
Name = EJF
Description = HiPurity Expantion Joint Female End
[EJM]
Name = EJM
Description = HiPurity Expantion Joint Male End
[RHM]
Name = RHM
Description = HiPurity Rubber Hose Male End
[THM]
Name = THM
Description = HiPurity Tygon Hose Male End
[TAP]
Name = TAP
Description = Tap Port End
[SADDLE]
Name = SDL
[IGM]
Name = IGM
Description = Victaulic IPS Male Grooved End
[IGF]
Name = IGF
Description = Victaulic IPS Female Grooved End
[IPF]
Name = IPF
Description = Victaulic IPS Female Plain End
[AWF]
Name = AWF
Description = Victaulic AWWA Female Plain End
[FGM]
Name = FGM
Description = Victaulic AWWA Male Grooved End (Flex)
[AGM]
Name = AGM
Description = Victaulic AWWA Male Grooved End
[AGF]
Name = AGF
Description = Victaulic AWWA Female Grooved End
[CGM]
Name = CGM
Description = Victaulic Copper Male Grooved End
[CGF]
Name = CGF
Description = Victaulic Copper Female Grooved End
[CUP]
Name = CUP
Description = Victaulic Copper Socket-Weld Male End
[FPM]
Name = FPM
Description = Victaulic Fire Protectioin Male End
[FPF]
Name = FPF
Description = Victaulic Fire Protectioin Female End
[PFM]
Name = PFM
Description = Victaulic Pressfit Male End
[PFF]
Name = PFF
Description = Victaulic Pressfit Female End
[MJF]
Name = MJF
Description = Ductile Mechanical Joint Female End
[MJM]
Name = MJM
Description = Ductile Mechanical Joint Male End
[FRF]
Name = FRF
Description = Ductile Flare End
[CC]
Name = CC
Description = Cable Channel Connection
[TC]
Name = TC
Description = Cable Tray Connection
[CF]
Name = CF
Description = Circular Flange Connection
[FOF]
Name = FOF
Description = Flat Oval Flange Connection
[GFF]
Name = GFF
Description = General Flat Oval Flange Connection
[GRF]
Name = GFF
Description = General Rectangular Flange Connection
[GLF]
Name = GLF
Description = Glue Female End
[GLM]
Name = GLM
Description = Glue Male End
[CBF]
Name = CBF
Description = Conduit Box Female End
[CBM]
Name = CBM
Description = Conduit Box Male End
[CDF]
Name = CDF
Description = Condulet Female End
[CDM]
Name = CDM
Description = Condulet Male End
[FW]
Name = FW
Description = Fusion Weld End
[WFR]
Name=WFR
Description=Wafer Rubber
[FLR]
Name=FLR
Description=Flanged Rubber
[FP]
Name = FP
Description = Flanged Pipe End
[ACF]
Name = ACF
Description = Applied Connector Flange Connection
[VSC]
Name = VSC
Description = Van Stone Connector
[BEM]
Name = BEM
Description = BEADED Male End
[BEF]
Name = BEF
Description = Plain End
[T-1]
Name = T-1
Description = Drive Slip
[T-6]
Name = T-6
Description = Hemmed S Slip
[T-11]
Name = T-11
Description = Standing S Slip
[TDC]
Name = TDC
Description = Lockformer TDC Duct Connector
[ADC]
Name = ADC
Description = Applied Duct Connector
Regards,
Aaron Wolfe
Piping Designer
Paul Mueller Company
P.O. Box 828
Springfield, Mo 65801
(417) 575-9780
E-mail: awolfe@muel.com
-----Original Message-----
From: Safdar Abbas [mailto:safdar.abbas@trivor.com]
Sent: Wednesday, March 03, 2004 9:18 AM
To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] End Connection Abbreviations
Thanks Paul for the list
-----Original Message-----
From: Hawco, Paul R. [mailto:PHawco@NGNS.com]
Sent: Monday, March 01, 2004 9:05 PM
To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] End Connection Abbreviations
Just passing along a few others - most are pretty obscure - never used and never seen them - pardon the unnecessary comments - don't have time to trim them out right now.
CP Type/Termination/Preparation
NOTE: Use 2-199 for bolted types; 300-399 for male types and
400-599 for female types. Refer to Reference Data Manager
(PD_DATA) Reference Guide for additional data.
1 = [Blank]
2 = 'FE' [Flanged end]
Use 11-15 for ends without integral gaskets; 16-19 for ends with
integral gaskets.
10 = 'FFTP (11-19)' [Flat-face flanged termination type]
11 = 'FFFE' [Flat-face flanged end]
16 = 'FFFEWG' [Flat-face flanged end with integral gasket]
Use 21-25 for ends without integral gaskets; 26-29 for ends with
integral gaskets.
20 = 'RFTP (21-29)' [Raised-face flanged termination type]
21 = 'RFFE' [Raised-face flanged end]
26 = 'RFFEWG' [Raised-face flanged end with integral gasket]
Use 31-35 for ends without integral gaskets; 36-39 for ends with
integral gaskets.
30 = 'RJFTP (31-39)' [RTJ-face flanged termination type]
31 = 'RJFE' [RTJ-face flanged end]
Use 41-45 for ends without integral gaskets; 46-49 for ends with
integral gaskets.
40 = 'TMFTP (41-49)' [Tongue/male-face flanged termination type]
41 = 'STFE' [Small-tongue-face flanged end]
42 = 'LTFE' [Large-tongue-face flanged end]
43 = 'SMFE' [Small-male-face flanged end]
44 = 'LMFE' [Large-male-face flanged end]
Use 51-55 for ends without integral gaskets; 56-59 for ends with
integral gaskets.
50 = 'GFFTP (51-59)' [Groove/female-face flanged termination type]
51 = 'SGFE' [Small-groove-face flanged end]
52 = 'LGFE' [Large-groove-face flanged end]
53 = 'SFFE' [Small-female-face flanged end]
54 = 'LFFE' [Large-female-face flanged end]
Use 61-65 for lap-flanged ends without integral gaskets; 66-69 for
lap-flanged ends with integral gaskets.
60 = 'FFLFTP (61-69)' [Flat-face lap-flanged termination type]
61 = 'FFLFE [Flat-face lap-flanged end]
Use 71-75 for lap-flanged ends without integral gaskets; 76-79 for
lap-flanged ends with integral gaskets.
70 = 'RFLFTP (71-79)' [Raised-face lap-flanged termination type]
71 = 'RFLFE' [Raised-face lap-flanged end]
Use 81-85 for lap-flanged ends without integral gaskets; 86-89 for
lap-flanged ends with integral gaskets.
80 = 'RJFLFTP (81-89)' [RTJ-face lap-flanged termination type]
81 = 'RJLFE' [RTJ-face lap-flanged end]
Use 91-95 for lap-flanged ends without integral gaskets; 96-99 for
lap-flanged ends with integral gaskets.
90 = 'TMFLFTP (91-99)' [Tongue/male-face lap-flanged termination type]
91 = 'STLFE' [Small-tongue-face lap-flanged end]
92 = 'LTLFE' [Large-tongue-face lap-flanged end]
93 = 'SMLFE' [Small-male-face lap-flanged end]
94 = 'LMLFE' [Large-male-face lap-flanged end]
Use 101-105 for lap-flanged ends without integral gaskets; 106-109
for lap-flanged ends with integral gaskets.
100 = 'GFFLFTP (101-109)'[Groove/female-face lap-flanged termination type]
101 = 'SGLFE' [Small-groove-face lap-flanged end]
102 = 'LGLFE' [Large-groove-face lap-flanged end]
103 = 'SFLFE' [Small-female-face lap-flanged end]
104 = 'LFLFE' [Large-female-face lap-flanged end]
Use 111-115 for ends without integral gaskets; 116-119 for ends
with integral gaskets.
110 = 'FFTBTP (111-119)'[Flat-face thru-bolted termination type]
111 = 'FFTBE' [Flat-face thru-bolted end]
116 = 'FFTBEWG' [Flat-face thru-bolted end with integral gasket]
Use 121-125 for ends without integral gaskets; 126-129 for ends
with integral gaskets.
120 = 'RFTBTP (121-129)'[Raised-face thru-bolted termination type]
121 = 'RFTBE' [Raised-face thru-bolted end]
126 = 'RFTBEWG' [Raised-face thru-bolted end with integral gasket]
Use 131-135 for ends without integral gaskets; 136-139 for ends
with integral gaskets.
130 = 'RJTBTP (131-139)'[RTJ-face thru-bolted termination type]
131 = 'RJTBE' [RTJ-face thru-bolted end]
Use 141-145 for ends without integral gaskets; 146-149 for ends
with integral gaskets.
140 = 'MRJTBTP (141-149)'[Male RTJ-face thru-bolted termination type]
146 = 'MRJTBEWG' [Male RTJ-face thru-bolted end with integral gasket]
Use 151-155 for ends without integral gaskets; 156-159 for ends
with integral gaskets.
150 = 'FFTBCSTP (151-159)'[Flat-face thru-bolted-with-cap-screws termination type]
151 = 'FFTBCSE' [Flat-face thru-bolted-with-cap-screws end]
156 = 'FFTBCSEWG' [Flat-face thru-bolted-with-cap-screws end with integral gasket]
Use 161-165 for ends without integral gaskets; 166-169 for ends
with integral gaskets.
160 = 'RFTBCSTP (161-169)'[Raised-face thru-bolted-with-cap-screws termination type]
161 = 'RFTBCSE' [Raised-face thru-bolted-with-cap-screws end]
166 = 'RFTBCSEWG' [Raised-face thru-bolted-with-cap-screws end with integral gasket]
Use 171-175 for ends without integral gaskets; 176-179 for ends
with integral gaskets.
170 = 'RJTBCSTP (171-179)'[RTJ-face thru-bolted-with-cap-screws termination type]
171 = 'RJTBCSE' [RTJ-face thru-bolted-with-cap-screws end]
Use 181-185 for ends without integral gaskets; 186-189 for ends
with integral gaskets.
180 = 'FFFTBTP (181-189)'[Flat-full-face thru-bolted termination type]
181 = 'FFFTBE' [Flat-full-face thru-bolted end]
186 = 'FFFTBEWG' [Flat-full-face thru-bolted end with integral gasket]
190 = 'MJTP (190-199)'[Mechanical joint termination type]
191 = 'MJE' [Mechanical joint end]
300 = 'MTP (301-399)'[Male termination type]
Use 301-309 for welded ends only
301 = 'BE' [Beveled end]
302 = 'OLET' [Olet beveled end]
Use 311-319 for welded ends only
311 = 'TBE' [Tapered and beveled end]
321 = 'MFE' [Male flared end]
331 = 'MTE' [Male threaded end]
341 = 'MGE' [Male grooved end]
351 = 'MQCE' [Male quick connect end]
361 = 'MFRE' [Male ferrule end]
371 = 'MHE' [Male hose end]
381 = 'SPE' [Spigot end]
Use 391-399 for welded ends only
391 = 'PE (391-399)'[Plain end]
393 = '3"FFPE' [Plain end, 3" field fit]
395 = '6"FFPE' [Plain end, 6" field fit]
400 = 'STP (401-409)'[Socket termination type]
401 = 'SE' [Socket end]
Use 421-429 for welded ends only
420 = 'SWTP (421-429)'[Socketwelded termination type]
421 = 'SWE' [Socketwelded end]
440 = 'FTTP (441-449)'[Female threaded termination type]
441 = 'FTE' [Female threaded end]
460 = 'FGTP (461-469)'[Female grooved termination type]
461 = 'FGE' [Female grooved end]
480 = 'FQCTP (481-489)'[Female quick connect termination type]
481 = 'FQCE' [Female quick connect end]
500 = 'FFRTP (501-509)'[Female ferrule termination type]
501 = 'FFRE' [Female ferrule end]
520 = 'FHTP (521-529)'[Female hose termination type]
521 = 'FHE' [Female hose end]
540 = 'BLTP (541-549)'[Bell end termination type]
541 = 'BLE' [Push-on bell end]
542 = 'MJBE' [Mechanical joint bell end]
590 = 'HTP (581-599)'[Hole end termination type]
Use 591-599 for welded ends only
591 = 'HCE' [Circular hole end]
600 = 'NTP (600-605)'[Null termination type]
601 = 'NE' [Null end]
650 = 'UDTP (651-659)'[User defined termination type]
651 = 'UD' [User defined end] (When a "UD"
preparation end is detected by the
system in the piping materials
class, it will prompt the User to define
the actual CP preparation to use. The
value provided by the User will be used
for initial placement of the component
as well as for subsequent recreations of
the piping system.)
Paul Hawco
Mechanical Engineer
Neill & Gunter (Nova Scotia) Limited
http://www.neillandgunter.com <http://www.neillandgunter.com>
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT <http://rd.yahoo.com/SIG=12crom27o/M=274551.4550177.5761904.1261774/D=eg roupweb/S=1705083319:HM/EXP=1078244487/A=2019528/R=2/SIG=14127pqan/*http :/ad.doubleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz= 300x250;code=18634;dcopt=rcl;ord=1078158087533856?>
Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
;sz=300x250;code=18634;dcopt=rcl;ord=1078158087533856?> Click Here
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou pweb/S=:HM/A=2019528/rand=937238317>
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/PipingDesign/
[Non-text portions of this message have been removed]
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/PipingDesign/
[Non-text portions of this message have been removed]
Yahoo! Groups Links Received on Wed Mar 03 16:18:00 2004
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:02 EDT