I found it very interesting as I'm sure many others did also.
I beleive the issue is that technical issues and solutions, such as provided on this site have enormous value, many subscribers have expressed this fact. We ought not forget this , underappreciate it , or undervalue it.
I have had the same conversations with engineers from Germany and England and all over the world.
I sure hope the fellow didnt give him the detail drawings before he got the commission.. unfortunately that hurts everybody including himself because it comes to be expected, or expected next time.
There is a world wide trend for the "money men" to profit off the knowledge and experience of others (knowledge which they themselves lack and do not want ot invest in) , and expect to pay nothing for it. Try hiring any other profession under the same basis as engineers and knwoledge workers are expected.
I have no problem with frank and open discussion of such issues. I do not beleive it will improve by "sweeping it under the carpet" as many try to do.
-----Original Message-----
From: Steve McKenzie [mailto:mechproj@xtra.co.nz]
Sent: Thursday, March 04, 2004 2:16 AM
To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] OT: Expat Piping Designers
Hi Rajendra
I think you may easily be forgiven for the occasional outburst. It did result in a number of responses, with impressive speed.
For what its worth, I think the frustration you are experiencing is not isolated to you and your country; I think its everywhere. Part of engineering, perhaps.
Cheers
Steve
-----Original Message-----
From: rajendra bajikar [mailto:rajendrabajikar@yahoo.com]
Sent: Thursday, March 04, 2004 8:59 PM
To: PipingDesign@yahoogroups.com
Subject: RE: [PipingDesign] OT: Expat Piping Designers
Dear Group,
My apologies may please be accepted.
Rajendra Bajikar.
Naha Jaydeep SPEL-T1 <Jaydeep.Naha@siemens.com> wrote: Dear Rajendra,
It would really be nice if you wouldn't indulge in writing the sort of mail below, especially in this group thoroughly intended for technical discussions. You may reserve your views to Paul (and anybody else) through personal mails only.
Besides, your topic is highly sensitive....and I even beg to differ from your view points. I wouldn't discuss that anyway here.
With best regards,
Jaydeep Naha.
-----Original Message-----
From: Nashine A-K SPEL-T1 [mailto:A-K.Nashine@siemens.com]
Sent: 04 March 2004 08:46
To: 'PipingDesign@yahoogroups.com'
Subject: RE: [PipingDesign] OT: Expat Piping Designers
Dear Mr. Paul,
I under-stand that this group is to discuss the matters related to piping engineering. Not the Indian attitude or Indian political system. I request that kind of mail attached below should not be floated to entire group or content is to be filtered.
With best regards,
Akash K. Nashine
> SIEMENS
Siemens Power Engineering
INDIA
> *Phone: +91 124 2842006 > * Fax: +91 124 2347512, 2349050 > *Mail : <<mailto:A-K.Nashine@siemens.com
-----Original Message-----
From: rajendra bajikar [mailto:rajendrabajikar@yahoo.com]
Sent: 04 March 2004 12:51
To: PipingDesign@yahoogroups.com
Subject: Re: [PipingDesign] OT: Expat Piping Designers
Dear Paul,
A Butterfly valve manufacturer had a problem with the Gear Actuator for
sizes above 350 mm NB. I knew a Mechanical Engineer of remarkable
achievements who offered to solve the problem, make a working model
(prototype) for a nominal fee of Rs.15,000/- (That is about US$300) only.
The manufacturer asked for a detailed drawing before he could make a
decision. This is the typical Indian attitude. The Engineer is the least
important person in India. Needless to say that the valve manufacturer is a
non technical person. On the other hand, the Doctor who would be "nowhere"
but for the sofisticated instruments designed and made by engineers, is a
highly respectable guy doing brisk "business" and earning through
"referrals".
You are well aware of the Indian Political system. You can not dismiss a worker without serving him a charge-sheet and holding a hearing but you can dismiss the Prime Minister without saying why the dismissal is sought. You may remember that Atal Bihari Vajpayee's government lost a vote of confidance in the Parliament by just One vote. And no reason was given for the "No confidance motion".
I am an Indian and proud of my country and it's heritage. But a group of about 550 MPs are driving this country down the hill and the brakes have already blown out. Needless to say that they don't know what they are doing. The reputation the Indian Standard Mark enjoys is good proof of this.
You are welcome to come to India to enjoy yourself. Looks good on the blue
print - actually non existant.
Regards,
Rajendra Bajikar.
Paul Bowers <pbowers@pipingdesign.com> wrote: Quite a few messages ago I talked about the possibility of westerners moving to India to work (sort of a reverse offshoring).
Cringely's latest column is about this:
http://www.pbs.org/cringely/pulpit/pulpit20040226.html
Damn, there goes all my hopes to own 2 or 3 5-series new BMWs and a 7-figure beach house. I am deathly afraid of being a lowly-regarded engineering type for the rest of my life and not get glamourous and rich. Ack, I will have failed!
Paul
To visit your group on the web, go to: http://groups.yahoo.com/group/PipingDesign/
To unsubscribe from this group, send an email to: PipingDesign-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
,
Rajendra Bajikar.
[Non-text portions of this message have been removed]
Yahoo! Groups Links
Yahoo! Groups Links
To visit your group on the web, go to: http://groups.yahoo.com/group/PipingDesign/
To unsubscribe from this group, send an email to: PipingDesign-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Rajendra Bajikar.
[Non-text portions of this message have been removed]
Yahoo! Groups Links
Yahoo! Groups Links Received on Thu Mar 04 14:30:00 2004
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:03 EDT