(no subject)

From: <M.>
Date: Sat Mar 20 2004 - 06:41:00 EST

Dear;
In addition to the valuable information that are available at Pipingdesign web page, on the following link there are some thumb rules re valve sizing and type selection.
Here it is:
http://www.fortunecity.com/campus/german/207/valve.html

Regards
Maged Tageldin

• Original Message ----- From: Paul Bowers To: PipingDesign@yahoogroups.com Sent: Saturday, March 20, 2004 12:34 PM Subject: Re: [PipingDesign]

   M.Mohamed Bharuk, I am going to suggest to you that you spend a few days    looking at articles linked at www.pipingdesign.com.

   I am the main moderator for this discussion list although there are    others.

   The site was started in 1998 as a tech info place for piping designers.    It has grown since then. There are a lot of informative articles there    that I have personally approved (this doesn't necessarily mean that I am    knower of all things piping design, you'll meet those guys later). Just    a bunch of stuff that should be known by pipers.

   There is a pretty good search engine for the site (    www.pipingdesign.com ), so just type in what you are looking for. If you    don't find it, ask here on this list. Some of us have 30+ years of    experience and can be crotchety though.

   Try to stay away from Al if you can, he's part of the NZ conspiracy.

   Paul

• Original Message ----- From: "Mohamed Bharuk M." <m.mohamedbharuk@saipem-india.com> To: <PipingDesign@yahoogroups.com> Sent: Saturday, March 20, 2004 3:26 AM Subject: [PipingDesign]

> Dear all
> can i know about , for what are the services, the particular valve(
   for eg gate or globe )is chosed.
> , available sizes for each valves
> This is truely not a clever testing
>
> M.Mohamed Bharuk

---

   PipingOffice - Excel Spreadsheets for Piping Calculations    http://www.pipingoffice.us/

---

   Main site: http://www.pipingdesign.com

         Yahoo! Groups Sponsor
               ADVERTISEMENT





------------------------------------------------------------------------------

   Yahoo! Groups Links

     a.. To visit your group on the web, go to:
     http://groups.yahoo.com/group/PipingDesign/

     b.. To unsubscribe from this group, send an email to:
     PipingDesign-unsubscribe@yahoogroups.com

     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed] Received on Sat Mar 20 06:41:00 2004