Thanks for the info Robin...
Robin Badcock <rbadcock@vision.net.au> wrote: Hi Jay,
You will need to fit a 4" PVC valve socket and glue this to your existing pipe work after correct preparation and priming of the joint. This valve socket then leaves you with a male thread that you merely fit a threaded socket of the desired material you wish to use and then screw a male hose tail into the socket. Be sure to use a double beaded thick walled tail assembly (that is undercut at the bead area) so as you can fit decent heavy duty clamps made from 3/8 rod style construction fitted opposite each other (180 degrees) on the tail end.
We have used such methods on 6" and larger flexible piping systems with zero failure up to 150 psi at times.
Hope this helps.
Cheers,
Robin.
> Good Day !
>
> Anybody knows how to connect or install 4" flexible tube to a 4" pvc
pipe?...
> We have difficulty in connecting these...Any techniques or special
applications?.
>
> Thanks,
>
> Jay
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> =========================================
> PipingOffice - Excel Spreadsheets for Piping Calculations
> http://www.pipingoffice.us/
> =========================================
> Main site: http://www.pipingdesign.com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups SponsorADVERTISEMENT
To visit your group on the web, go to: http://groups.yahoo.com/group/PipingDesign/
To unsubscribe from this group, send an email to: PipingDesign-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed] Received on Sun Jul 11 18:31:00 2004
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:04 EDT