Thank you Pankaj, Its help me a lot.
Regards,
Sathish Babu
Pankaj.Mandal@fluor.com wrote:
By virtue of higher wall thickness of its body, valves, in general, are
more rigid than pipe itself and it is a reasonable assumption to consider
valves as a rigid element in pipe stress analysis. However, in some
precision components, like the HP bypass valves or the steam stop valves,
some vendors insist on ensuring force and moment at pipe connections
within limits. This would limit valve body distortion due to piping forces
and ensure guaranteed performance. After all, valve manufacturers are the
performance guarantors.
Checking local element force and moment is OK. However, please ensure that you convert these vectors from local coordinate system to global.
Hope this helps.
Pankaj Mandal.
sathish babu <togsb@yahoo.co.in>
02/24/05 10:22 AM
Please respond to PipingDesign
To: PipingDesign@yahoogroups.com
cc:
Subject: [PipingDesign] Regarding Piping Stress Analysis
.
Hello Everybody,
I will introduce myself to the group, i am
sathish babu working in ASLTOM Projects india Ltd in piping department of
plant engineering section.
I am a Graduate Engineer and having a experience of three and Half Years.
Now i am working in CAESAR II stress analysis
When a Forces and moments to be checked ? to my Idea i usually check on Equipment Nozzles where the piping is to be connected for that i will be defining the nozzle node to have displacement and check in the Restraints Summary for all operating and sustained condition.
Now i faced a small problem , i have angle valve ( Main steam bypass valve dumped to condenser ) while doing analysis i have defined it as rigid component and finished the analysis.
After that the valve manufacturer produced the drawing and asked me to check the allowable forces and moments on the valve.
What i did was went to local element forces and moments and checked the allowable forces and moments on the corresponding node to be OK - Whether This is Right or I have to do anything more
If anyone have any Idea about when this forces and mon=ments to be checked and the basis please explain
Thanking you
Sathish Babu
Steve McKenzie <mechproj@xtra.co.nz> wrote:
Paul
I have already given myself a stern warning about this, and any further outbursts on my part will, regrettably result in me requesting my resignation. This has been conveyed to me in a formal letter as a first and final warning, so I will not accept any excuses from myself. Sometimes I hate being my own boss.
It sure would be nice to leave this whole national/language mess alone.
If you agree please indicate by not replying.
Cheers
Steve
-----Original Message-----
From: Paul Bowers [mailto:pbowers@pipingdesign.com]
Sent: Thursday, February 24, 2005 3:58 PM
To: PipingDesign@yahoogroups.com
Subject: Re: [PipingDesign] Metallized valve
Sajit Viswan wrote:
> Paul,
>
> I haven't understood your giberrish. Didn't bother to
> try to understand either.
>
> Sajit
Maybe all the recent discussion has served to bring out unsaid, possibly
pent-up thoughts and attitudes - it wasn't planned to do so.
I remind everyone that you are all free to unsubscribe at any time.
This discussion list is at about 1100 members now; well over 75% do not ever contribute to the technical discussion. I don't think that 750 sudden unsubscriptions would hurt the quality of the technical discussion.
Then again, it seems to be a free-for-all at the moment and the best move might be to just let it play itself out without possibly heavy-handed intervention.
Paul
http://www.pipingoffice.us/ =========================================Main site: http://www.pipingdesign.com
Yahoo! Groups Links
-- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005 ========================================= PipingOffice - Excel Spreadsheets for Piping Calculations http://www.pipingoffice.us/ ========================================= Main site: http://www.pipingdesign.com Yahoo! Groups Links Yahoo! India Matrimony: Find your life partneronline. [Non-text portions of this message have been removed] ========================================= PipingOffice - Excel Spreadsheets for Piping Calculations http://www.pipingoffice.us/ ========================================= Main site: http://www.pipingdesign.com Yahoo! Groups Links --------------------------------------------------------------------------------\ --------------------- The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, business-confidential and/or privileged material. If you are not the intended recipient of this message you are hereby notified that any use, review, retransmission, dissemination, distribution, reproduction or any action taken in reliance upon this message is prohibited. If you received this in error, please contact the sender and delete the material from any computer. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of the company. --------------------------------------------------------------------------------\ ----------------------- [Non-text portions of this message have been removed] ========================================= PipingOffice - Excel Spreadsheets for Piping Calculations http://www.pipingoffice.us/ ========================================= Main site: http://www.pipingdesign.com Yahoo! Groups SponsorADVERTISEMENT --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/PipingDesign/ To unsubscribe from this group, send an email to: PipingDesign-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! India Matrimony: Find your life partneronline. [Non-text portions of this message have been removed]Received on Fri Feb 25 07:50:00 2005
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:06 EDT