Re: spooling

Thanks a lot Barbara,,..

How about sample of standard take-off of pipe spool with elbow?

  In PipingDesign@yahoogroups.com, "James, Barbara" <bjames@m...> wrote:
> Better Solution: Learn how to do it by hand!
>
> The idea of spooling is to identify sub-assemblies to be
constructed in
> a works remote from site and transported to site for final
assembly.
>
> First identify constraints on spool sizes:
> A) Physical limitation of transport - length * breadth * height
> B) Physical limitation of site access - likely to be tighter than
> transport limits.
> C) Weight limits - check SWL of cranes, forklifts and manual
handling
> requirements at site and at the works.
> D) Access difficulties at site, don't specify a field weld in a
location
> with no access.
>
> Identify locations for green ends (field fit tolerances) typically
100mm
> to 150mm, but check your company's procedures or Client Spec. You
will
> need to have at least one green end in each of the orthogonal
> directions, maybe more if you have long runs or many changes of
> direction.
>
> If you have cold pulls or cold pushes in the system, the locations
of
> these will be field welds, but not green ends, they need to be
fully
> prepped so that you can ensure that the cold pull is applied
accurately.
>
> Start at a logical place on your iso, eg equipment nozzle and work
along
> the pipework, taking care of the physical constraints and making
sure
> that cold pulls and free issue items are marked as field welds.
>
> I think that covers it, though I expect there will be comments
from NZ
> and the US!
>
> Barbara
>
>
> > -----Original Message-----
> > From: Gang Cvg [mailto:cvg_gang@y...]
> > Sent: 21 June 2005 06:07
> > To: PipingDesign@yahoogroups.com
> > Subject: Re: [PipingDesign] spooling
> >
> > Solution:
> > Procure a s/w called SPOOLGEN
> > Regards.
> > C. V. Gangadharan
> >
> > --- bertoso2000 <bertoso2000@y...> wrote:
> >
> > >
> > > is anybody can help me how to do piping spooling in iso?
> > >
>
>
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

• -
  > -
  > IMPORTANT NOTICE.
  >
  > This E-Mail and any files transmitted with it, are confidential
  and may
  > be
  > privileged and are for the exclusive use of the intended recipient
  (s).
  > If you are not the intended recipient(s) please note that any form
  > of distribution, copying or use of this communication or the
  > information in it, is strictly prohibited and may be unlawful.
  >
  > If you have received this E-Mail in error please return it to the
  > sender.
  > We should be grateful if you would also copy the communication to
  > postmaster@m... then delete the E-Mail and destroy any
  > copies of it.
  >
  > It is your responsibility to scan any attachments for viruses.
  >
  > For further information, visit us at WWW.MITSUIBABCOCK.COM