RE: [Fwd: automatic 2 way valve]

From: <Steve>
Date: Thu Sep 15 2005 - 02:27:00 EDT

Hi Mike

What you are looking for is a thermostatic valve. There are hundreds of different types.
Danfoss make a fairly broad range.
  In this hemisphere, RMC is a fairly popular brand and make valves specifically for solar systems including freeze protection PT and dump valves.

Cheers

Steve

-----Original Message-----
From: <a href="/group/PipingDesign/post?postID=E1NmfsN3tQQ3DHQfhriWaOgjIuMglXJ-VIaa5cSlfbgTd17pVhK373utQrkK3n6Ih9qM3ZPVdytQ03sntOK52p9NbXlVIQ">PipingDesign@yahoogroups.com</a> [mailto:<a href="/group/PipingDesign/post?postID=E1NmfsN3tQQ3DHQfhriWaOgjIuMglXJ-VIaa5cSlfbgTd17pVhK373utQrkK3n6Ih9qM3ZPVdytQ03sntOK52p9NbXlVIQ">PipingDesign@yahoogroups.com</a>] On Behalf Of Paul Bowers
Sent: Thursday, September 15, 2005 10:35 AM To: <a href="/group/PipingDesign/post?postID=E1NmfsN3tQQ3DHQfhriWaOgjIuMglXJ-VIaa5cSlfbgTd17pVhK373utQrkK3n6Ih9qM3ZPVdytQ03sntOK52p9NbXlVIQ">PipingDesign@yahoogroups.com</a> Subject: [PipingDesign] [Fwd: automatic 2 way valve]

• Original Message -------- Subject: automatic 2 way valve Date: Wed, 14 Sep 2005 07:26:07 -0400 From: Mike Kocsmiersky <mikek@KosmoSolar.com> To: <info@pipingdesign.com>

Hello,
I'm looking for an automatic valve to be used in a solar hot water heating system. The valve should open at 165 deg F and close at any temp below that. Should be rated for up to 200 deg F. Must work solely

on temp, no power requirement. Will be fit onto 3/4" cu piping. Thanks for your help.

Mike Kocsmiersky
Kosmo Solar
PO Box 90597
Springfield, MA 01139
(413) 734-1456

---

PipingOffice - Excel Spreadsheets for Piping Calculations

<a href="http://www.pipingoffice.us/">http://www.pipingoffice.us/</a> =========================================

Main site: <a href="http://www.pipingdesign.com">http://www.pipingdesign.com</a>

Yahoo! Groups Links Received on Thu Sep 15 02:27:00 2005