forget about the sofyware, an incompetent designer probably do not
even realize what a computer looks like.
- In PipingDesign@yahoogroups.com, Richard Beale <r_beale@...>
wrote:
>
> What piping software do the incompetent piping designers operate?
>
> Richard Beale
> EnCana Oil and Gas Partnership
> ----- Original Message -----
> From: tomcruz55
> To: PipingDesign@yahoogroups.com
> Sent: Saturday, January 13, 2007 6:15 AM
> Subject: [PipingDesign] Re: Pump Nozzle loads
>
>
> --- In PipingDesign@yahoogroups.com, "Saha, Tanmoy" <TSaha@>
> wrote:
> >
> But sometimes or most of the times I found people deciding
> > supporting and stress analyzing are not sufficiently
experienced.
>
> My take. My experience show otherwise. Most if not all of the
> designers ive work with are competent and show good judgement.
Im
> talking about the guys who operate the PDS. The same goes to the
> engineers repsonsible for ensuring that affected process piping
are
> code compliant.
>
> _______________________________
>
> People
> > do not think that whenever some liquid flows through the pipe
it
> hits at
> > every change in direction creating some forces. To restrain
that
> proper
> > guides and line stops are to be provided otherwise as an
obvious
> case
> > vibration problem will come.
>
> My take. Well vibration do not necessarily pop out wnenever a
> support or line stops are provided or where changes in pipe
> direction exist. Perhaps other problem, but not vibration. And
when
> a process piping do encounter a severe vibration, the location
where
> its happening is not always obvious.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Received on Sun Jan 14 00:39:00 2007