PIPE WALL THICKNESS CACULATION

From: <sabirap>
Date: Sat Jan 05 2008 - 02:55:00 EST

Hi Gents…is this calculation correct.

PIPE WALL THICKNESS CACULATION Code - ASME B 31.3

Pipe Material - SS A-358 TP 321 CPI Welded

Internal Design Pressure P 5.5 barg – 80 psig

Temperature - 150 0 C – 302 F

Allowable Stress S - 20000 psig

Coefficient (Factor) Y - 0.4

Quality Factor (Joint Efficiency) E - 1

OD of Pipe D - 24''

Corrosion Allowance c - 0

t = PD / 2 (SE + PY)

80 * 24 / 2[(20000 * 1) + (80 * 0.4)]

1920 / 40064 = 0.0479 inch

tm = t + c = 0.0479 + 0 = 0.0479 inch …is this calculation correct.

I tried to search the Allowable Stress – S, for CS A-672 GR 60 Class 22 or 32, Longitudinally Welded, SAW. I couldn't find it in ASME B31.3. Anybody can advice me on this…..?

Thank you,

Regards,

Sabir

[Non-text portions of this message have been removed] Received on Sat Jan 05 02:55:00 2008

This archive was generated by hypermail 2.1.8 : Tue Mar 09 2010 - 00:21:22 EST