I also agree with Melvin that internally phenolic coating valve is not needed. I just would like to add that all valve wetted parts to comply with NACE MR-0175 requirements since the service is sour
Khaled
--- MAIL MUG <melvin_magbanua@yahoo.com> wrote:
> I totally agree that you don't need a phenolic
> coated internal parts of the valve.
>
> Fro Sour service CC valve, say its a ball valve;
>
> Here's an example Ball VAlve Specs;
> The valve Body/Bonnet construction should be
> Carbon steel Forged/cast/welded or flanged and the
> material to ASTM A 105 or A 216 WCB/WCC or ASTM A
> 350 Gr.LF2.
>
> The ball construction to Carbon steel Forged/CAst
> + 0.003" ENP and the material to A105/A 216
> WWCB/WCC/A 350 LF2 + enp or A216 WCC + Ni.
> Boron/Hastelloy overlay 0.003"
>
> I can give a complete list of the Stem, Trunnion,
> Body seat ring, stem seal, spring and boby stud/nuts
> if you want. Contact me by e-mail outside the forum
> and I'll try to help you.
>
> Melvin
> mmag@chevron.com
> Mobile No. +1-201-693-4769
>
>
>
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 20:24:15 EDT