Re: [PipingDesign] Re: trunnion

From: <bruce.r.raymond@fluor.com>
Date: Mon Mar 24 2008 - 13:18:00 EDT

<shanavas wroye>
my application is for sloping lines without RF pad.i am having pipes(of same material of main pipe) of three thickness for trunnion .in one case its larger than main pipe thickness.

Thanks for the clarification oin respect to application. I see no problens in respect to your post, only I would add 1 point - as you are omn sloping lines dont forget that you should take into aggount the overall expansion on the system over support locations, and also the possible additions of guiges or anchors omn the bearing plate on the lower end of your trunion supports.
good luck and happy piping
Bruce R. Raymond
Senior Design Supervisor
Fluor

---

The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, business-confidential and/or privileged material. If you are not the intended recipient of this message you are hereby notified that any use, review, retransmission, dissemination, distribution, reproduction or any action taken in reliance upon this message is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of the company.

---

[Non-text portions of this message have been removed] Received on Mon Mar 24 13:18:00 2008